Engine movement when placed into reverse
-
- Registered User
- Posts: 7
- Joined: Thu Jun 16, 2022 8:24 pm
Engine movement when placed into reverse
I have all new mounts, GM parts. My engine still bucks into reverse and the movement is all in the large bushing of the torque strut. Is the bushing supposed to have slack in it? I see posts saying yes to that question, but it seems excessive and has a clunk. I'd appreciate any tips.
Re: Engine movement when placed into reverse
There should be a small amount of flexibility in the dogbone (torque-strut), if that is what you mean by 'slack', but not a lot. It shouldn't move, like slide back and forth, in the bracket AT ALL. When GM re-designed the engine-mounts for these cars, they gave them a lot more 'slop' than they had in the original design. The drive-train virtually swings on two pivot-points like a rotisserie chicken, with the torque-strut holding it from pivoting. If the engine is jumping excessively, there may be something going on mechanically. For instance, if the idle is too high, it will jump, or if there is a transmission problem it could move a lot too.
Some people replace the mounts and/or dogbone with aftermarket polyurethane to stiffen it up, I have never cared much for it as I've seen too many of them break and the poly crumble out, and polyurethane is 'noisy', but some others have tried 'bolstering' their mounts with a liquid poly, such as that available from McMaster-Carr, an industrial supply distributor. Shouldn't need that with new mounts in a stock car though.
I think though, with new OEM mounts, the question for me is how much is it actually moving? Is it excessive, or just normal for the newer design, which is honestly quite a lot.
Some people replace the mounts and/or dogbone with aftermarket polyurethane to stiffen it up, I have never cared much for it as I've seen too many of them break and the poly crumble out, and polyurethane is 'noisy', but some others have tried 'bolstering' their mounts with a liquid poly, such as that available from McMaster-Carr, an industrial supply distributor. Shouldn't need that with new mounts in a stock car though.
![No :no:](./images/smilies/nea.gif)
I think though, with new OEM mounts, the question for me is how much is it actually moving? Is it excessive, or just normal for the newer design, which is honestly quite a lot.
1989 SuperCharged 3800 Srs-II (First)Six-Speed GTU
1990 Turbo 3.4 5-Speed T-Type
1990 4.0L 4-Cam 32-Valve V-8 5-Speed Indy GTi (Project)
1990 Stock(!) 3.1 MPFI Auto Indy
1995 LA1/L82 4T60E Z-26
1995 3.4 DOHC Turbo 5-Speed Z-26
1990 Turbo 3.4 5-Speed T-Type
1990 4.0L 4-Cam 32-Valve V-8 5-Speed Indy GTi (Project)
1990 Stock(!) 3.1 MPFI Auto Indy
1995 LA1/L82 4T60E Z-26
1995 3.4 DOHC Turbo 5-Speed Z-26