Selling Turbo GTZ
Posted: Fri Sep 23, 2005 11:24 pm
I've decided to sell my car.  I can give more details later, but I'm looking for $6000 (now $4500) which I think it pretty reasonable.
This includes many items from a collection of 10 years of ownership.  Extra engine, laptop, NA and Turbo tune files.
The reason I am selling is that I have not driven the car in 2 years and I am looking to purchase something that I can do with my family.  My life has changed so much in the last 5 years that my GTZ just doesn't fit into my needs or capabilities to enjoy it.  I moved from an urban location to a rural one and I have 3 kids that are 5 years old and under.  I'd like to see it go to a new home that can enjoy the fun and take this car to the next level.  The engine can support much more (400 HP) if some minor things are upgraded.  I just dont' have the time to make it more than it currently is.
The car runs fine, but has an exhaust manifold leak on cylinder #1.  I have not checked to see what is wrong.  Could be as minor as a gasket change.  I cannot remember which gasket I used and it is possible I did something silly because it started leaking pretty quick after repairing it.  I'm guessing it blew the gasket out from exhaust pressure.  I know the manifold was not warped because I had it checked and ground on a table grinder.  It needs to have the old fuel driven out of it before it is put through it's paces.  Last time I drove it I got 34 MPG on the highway @ 75 MPH.  It was drag raced as it sits and ran a 13.5 @ 105 just like in the past.  The numbers are still on the windows.  It now has a selectable dual boost controller. (my design, as is almost everything)  I started on traction control via ABS (lower boost at wheelspin) but it didn't work on the first try.  I think I need to use a different wire.  It also has a polished intake and cam covers.  Don't ask how many hours are in those...  To drive it home it might need the battery charged and the exhaust leak would be annoying, but likely not a problem.  Tires may have flat spots.  I would even consider delivering it if you pay gas.  I can tow it on a dolly.
Parts currently installed:
93 LO SOHC Block (same as HO and strongest webbing around mains)
Clevite rod and main bearings (stock size)
Stock Crank and Rods
Wiesco 0.030 over (1MM) pictons 8.5:1 CR
ARP Head studs
FelPro Head Gasket
Ported 086 head, Relieved valve pockets, smoothed chamber (no sharp edges)
Stock HO cams
Polished HO intake manifold
Polished Cam Covers
Just a few things I can think of quickly that are extras.  I have all the original parts for this car to make it a number matching original car because you never know.  This car was one of 1656 made in 92.
SCE copper head gasket
SCE O-ring kit
Original HO engine
HO injectors (sold)
753 head.  Might need valve stem seals (if that)  (sold)
Old laptop with all programming and tunes for NA and turbo, organized with a log of changes for most files.
GT wheels with Toyo Proxie RA1 race tires. (sold)
Extra race tires
226 degree cams hardly used (sold)
adjustable cam degree gears barely used (sold)
many spare used parts from engines and wiring harnesses
KYB? struts, one blown and needs rebuilt
original springs
I'm sure the list goes on if I would look in the garage.
Please contact me if you are interested or have any questions.  With minor work this car would be perfect to drive anywhere.  I just don't have the time to make it what I want.  I'm hoping someone will want it and make it even better.
Thanks
This includes many items from a collection of 10 years of ownership.  Extra engine, laptop, NA and Turbo tune files.
The reason I am selling is that I have not driven the car in 2 years and I am looking to purchase something that I can do with my family.  My life has changed so much in the last 5 years that my GTZ just doesn't fit into my needs or capabilities to enjoy it.  I moved from an urban location to a rural one and I have 3 kids that are 5 years old and under.  I'd like to see it go to a new home that can enjoy the fun and take this car to the next level.  The engine can support much more (400 HP) if some minor things are upgraded.  I just dont' have the time to make it more than it currently is.
The car runs fine, but has an exhaust manifold leak on cylinder #1.  I have not checked to see what is wrong.  Could be as minor as a gasket change.  I cannot remember which gasket I used and it is possible I did something silly because it started leaking pretty quick after repairing it.  I'm guessing it blew the gasket out from exhaust pressure.  I know the manifold was not warped because I had it checked and ground on a table grinder.  It needs to have the old fuel driven out of it before it is put through it's paces.  Last time I drove it I got 34 MPG on the highway @ 75 MPH.  It was drag raced as it sits and ran a 13.5 @ 105 just like in the past.  The numbers are still on the windows.  It now has a selectable dual boost controller. (my design, as is almost everything)  I started on traction control via ABS (lower boost at wheelspin) but it didn't work on the first try.  I think I need to use a different wire.  It also has a polished intake and cam covers.  Don't ask how many hours are in those...  To drive it home it might need the battery charged and the exhaust leak would be annoying, but likely not a problem.  Tires may have flat spots.  I would even consider delivering it if you pay gas.  I can tow it on a dolly.
Parts currently installed:
93 LO SOHC Block (same as HO and strongest webbing around mains)
Clevite rod and main bearings (stock size)
Stock Crank and Rods
Wiesco 0.030 over (1MM) pictons 8.5:1 CR
ARP Head studs
FelPro Head Gasket
Ported 086 head, Relieved valve pockets, smoothed chamber (no sharp edges)
Stock HO cams
Polished HO intake manifold
Polished Cam Covers
Just a few things I can think of quickly that are extras.  I have all the original parts for this car to make it a number matching original car because you never know.  This car was one of 1656 made in 92.
SCE copper head gasket
SCE O-ring kit
Original HO engine
HO injectors (sold)
753 head.  Might need valve stem seals (if that)  (sold)
Old laptop with all programming and tunes for NA and turbo, organized with a log of changes for most files.
GT wheels with Toyo Proxie RA1 race tires. (sold)
Extra race tires
226 degree cams hardly used (sold)
adjustable cam degree gears barely used (sold)
many spare used parts from engines and wiring harnesses
KYB? struts, one blown and needs rebuilt
original springs
I'm sure the list goes on if I would look in the garage.
Please contact me if you are interested or have any questions.  With minor work this car would be perfect to drive anywhere.  I just don't have the time to make it what I want.  I'm hoping someone will want it and make it even better.
Thanks