Beretta.net

ok im trying to do a dew things with my door panel and i got it off now i got to take it apart to do what i want my question is how do i take it apart and do what i want n then put it back together and make it still look the way i took it off with the accept the changes i have made to it

Well, first off, maybe a picture of what you are trying to take apart? What sort of modification are you attempting to do? A bit more descriptive with your problem may help.

ok it is a 93 panel i got it off from the car.... now there are 4 pieces to the door panel but there like melted together . i want to take them apart pain/recover them n then put them back together but the putting back together is what i need help with ill get pic tomarrow

I just did this with my 91...same panels.

I split them apart carefully with a screwdriver and reassembled them with construction adhesive that Kyle Anderson suggested. I have not had them done for long, but all seems well.

ok so here are some pis of what im trying to do

Split them carefully with a screwdriver or small pry bar. They will come, just be careful.

Thanks i am trying that right now.. But i am using a butter nife because i cant find a screw driver lol!.. Its coming out slowly but surely

That fabric, did you take it off?? if so how?? or did you just cover over it??

I took it off. Peel it off little by little and be sure the adhesive/foam comes with the fabric. If you do it quickly it will leave the adhesive behind and it's a bitch to get off.