Beretta.net

I'm trying to figure out If the rear sway bar from a 88 z24 will fit my 1994 beretta z26. Seeing how it doesn't have one. anyhelp is appreciated. And im sorry if this was already asked. I've searched with no luck.
Kyle.

You should be able to make it fit. You likely have a internal swaybar in your axle. You need to trim the triangular blocks that the cav bar mounts with to make it work.

So i got on this today.The cavi bar wont bolt up to the Axel on the ends. I need to find a bar were the ends are parallel with the rear axel. Thanks for the help.

Get one from an 88 Z51 car; it's a 21 or 22mm solid bar (check the ends of the bar to make sure it's solid and doesn't have plastic caps on it) and that will bolt up just fine to your rear axle.