1989 base...
Posted: Wed Mar 09, 2011 4:59 am
this is my 1989 Chevrolet Beretta Base. I got as my first car from my grandmother. It was OEM as gently caress and hella nice. It needed mad interior work ie door panels, headliner, carpet and a dash. I got this car when I was 15. This is what started my love/interest in cars.
Mod List
Engine
2.8 mpfi- lost oil pressure=swapped
3.1 mpfi- knocking = swapped
3400 sfi- project never ran=swapped
3.1 mpfi- new motor - scraped lol
Hella OEM
Transmission
Stock TH125C (3T40) 3 speed auto. = blew
Isuzu 5 speed swap. - swapped for auto
Interior
1989 Corsica dash swap
full gauge cluster
91+ center console
96 rear side panels
OEM Red
Exterior
Half factory "Black metallic"
Junkyard fenders
Junkyard ds door
94-96 Z26 F/R bumpers
Suspension
FE7 rear springs
stock shocks
FE1 front springs
Z51 rear sway bar
Energy front suspension bushings
Here it is before I even got it.

Needed a new battery and it fired right up first try after sitting for about 5 months.
This is the OEM interior.

If you haven't seen one of these, the 88-91 interiors are badass looking but have mad issues with the dashes cracking.
After a little clean up and what not, this is what it was looking like.




Found a few parts in the junkyard like a Z26 rear bumper and sway bar etc.


How it CURRENTLY sits.


Future Mods:
Make it run.
repaint factory black metallic
Eibach prokit
Kyb shocks
New body panels
3400/3500 hybrid -maybe lol
Redo entire interior
More to come when I get home this weekend and start tearing into it again.

Mod List
Engine
2.8 mpfi- lost oil pressure=swapped
3.1 mpfi- knocking = swapped
3400 sfi- project never ran=swapped
3.1 mpfi- new motor - scraped lol
Hella OEM
Transmission
Stock TH125C (3T40) 3 speed auto. = blew
Isuzu 5 speed swap. - swapped for auto
Interior
1989 Corsica dash swap
full gauge cluster
91+ center console
96 rear side panels
OEM Red
Exterior
Half factory "Black metallic"
Junkyard fenders
Junkyard ds door
94-96 Z26 F/R bumpers
Suspension
FE7 rear springs
stock shocks
FE1 front springs
Z51 rear sway bar
Energy front suspension bushings
Here it is before I even got it.

Needed a new battery and it fired right up first try after sitting for about 5 months.
This is the OEM interior.

If you haven't seen one of these, the 88-91 interiors are badass looking but have mad issues with the dashes cracking.
After a little clean up and what not, this is what it was looking like.




Found a few parts in the junkyard like a Z26 rear bumper and sway bar etc.


How it CURRENTLY sits.



Future Mods:
Make it run.
repaint factory black metallic
Eibach prokit
Kyb shocks
New body panels
3400/3500 hybrid -maybe lol
Redo entire interior
More to come when I get home this weekend and start tearing into it again.

