Beretta.net

I have a 96 Full Guage Cluster out of my old Z26.

It has 69,186 miles on it.

It's in excellent shape and has been stored inside my house since I took it out of the car.

As far as I know everything worked on it when it came out of the car. The sale is still however "As Is"


I've personally never seen one in a junkyard anywhere.

$100 plus $20 to ship anywhere in the U.S. It will be properly packed so it does not break in transit.

I will ship outside the U.S, but for the same size box exceeds $60 for shipping








I also have a set of black sun visors. They would have to be recovered, I tore them apart because someone put nasty blue vinyl over and the glue they used was running all over and sticky For $10 plus $11 shipping.

I'm intrigued by this. Anyone care to fill me in with simple yes or no answers without getting to technical:
I have a '95 beretta base 5spd and want to have a tach (because we all know the base 5spd doesn't have one for a bizarre reason).
A. Can I put this thing on it
B. Is it an easy plug and play

no, you need a 1994 quad 4 cluster as your car is OBD1.5 then it is plug in and play

I'm sure you could use it you would just have to tweak several things. I'm not sure what those are but I'm sure it could be done.

A 95 Ecm from my experience doesn't have the necessary Tach output signal that a 96 cluster needs to run...

It is however a question if a 96 V6 cluster will work on a 96 4cylinder... that has not been tested since the signal comes from the ECM. Unfortunately in this applicatoin on the 95 and older the signal is direct from the Ignition module so v6 to 4cylinder it differs, nevermind the fact that this 96 cluster wants the signal from the ECM, and not the ICM.

Okay so I need a 1994 quad 4 cluster to plug and play is what I'm getting from here. Well that's going to be be easier said than done to find. Thanks for the info

Well, you could also have a 2.2 cluster with a tach, though they are quite rare.

Still availible?

Yes I still have it