Page 1 of 4

cams ?

Posted: Mon May 16, 2011 6:49 pm
by ClonedGTZ
is there any companys still making cams for the 3.1 v6 ? i want to add a cam while im doing a p&p to the heads and porting the intake mani. for when i get the MRZ TB.

Re: cams ?

Posted: Mon May 16, 2011 7:14 pm
by SuzukiGhostRider
http://60degreev6.com/forum/ would have loads of information on this.

Re: cams ?

Posted: Mon May 16, 2011 7:20 pm
by ClonedGTZ
i figured, thought id ask here first. thanks

Re: cams ?

Posted: Mon May 16, 2011 9:23 pm
by KFLO 93 GT
Comp cams makes em still.

Get on summitracing.com and do the make and model search. They offer 3 or 4 different cams.

Re: cams ?

Posted: Mon May 16, 2011 9:31 pm
by ClonedGTZ
ok cool.

Re: cams ?

Posted: Tue May 17, 2011 4:02 pm
by michi

Re: cams ?

Posted: Tue May 17, 2011 6:09 pm
by ClonedGTZ
sick they have headers for the 3.1. i can save some cash and just buy a set instead of havin a shop make them.

thanks for the link michaelgtz

Re: cams ?

Posted: Tue May 17, 2011 7:12 pm
by SuzukiGhostRider
michaelGTZ wrote:http://www.wot-tech.com
Thank you Michael. I couldn't remember the name of the parts house site, but I knew Ben from 60* ran one. :D

Re: cams ?

Posted: Tue May 17, 2011 8:31 pm
by ClonedGTZ
so with headers, P&P heads, ported and honed intake mani's, the 62mm TB, underdrive crank pulley, lightened alt pulley, deleted a/c compressor, a cam, and (if possible) a chipped ECU and a high flow cat. what kinda numbers u think i might hit? im thinkin id be somewhere around 200hp

Re: cams ?

Posted: Tue May 17, 2011 8:37 pm
by KFLO 93 GT
Thats about what a stock 3400 would put down too, and cost a whole lot less.

Re: cams ?

Posted: Tue May 17, 2011 8:44 pm
by ClonedGTZ
not much of a option to do a swap. so im doin what i can with what i got.

Re: cams ?

Posted: Wed May 18, 2011 8:28 am
by 3X00-Modified
ClonedGTZ wrote:not much of a option to do a swap. so im doin what i can with what i got.
Whats the limitation?

Re: cams ?

Posted: Wed May 18, 2011 8:36 am
by ClonedGTZ
only having 1 car to drive

Re: cams ?

Posted: Wed May 18, 2011 8:41 am
by 3X00-Modified
So wouldnt it be easier to build a 3400 out of the car and swap it in one day, rather than down the car for an extended period of time to do all the little part additions? I would think a swap would allow you to get all your ducks in a row so its a drop in swap in one day... rather than something that has to be pulled and built, then put back in.

just my .02

Re: cams ?

Posted: Wed May 18, 2011 8:50 am
by ClonedGTZ
yeah i can do it that way. with stuff like the heads and intake , ill be gettin from the yard so theres no down time besides the day that i install them. well see , id like to see what i can get outta the 3.1 first