Page 1 of 1
headgasket?
Posted: Sun Oct 08, 2006 7:30 pm
by Guest
95 3.1 beretta has rough idle,and milky residue on intake/egr port underneath egr valve when opened up. coolant had sheen to it,but no milky look on oil dipstick.
headgasket?
Posted: Mon Oct 09, 2006 7:56 am
by docrodg
That sounds like a head gasket. The oil in the pan is diluting the coolant enough that it does not show yet. Only really bad head gaskets do that. Try a pressure check of the cooling system if you really want to verify and have the gear.
headgasket?
Posted: Tue Oct 10, 2006 11:13 pm
by wicked-irocz
usually its just the intake manifold gaskets. when you say egr valve what do you mean? You dont usually open up the egr valve.
headgasket?
Posted: Mon Oct 16, 2006 6:41 pm
by nicky gio88gt
does it blow white smoke? how much coolant are you losing?