Beretta.net

hows it going ever one just wanted to ask this one thing and see if i could get some help with it.
i have a 89 gtu 2.8 A.T 190k and the gauges will not work at all when the car is runing the look to be stuck or something if any one knows anything about this plz help.  thnaks

    89GTU
ps they use to work when i get the car about a few weeks ago

Hopefully it's just the connector on the back of your instrument cluster that came loose.  Remove a couple of 9/32" (7mm) screws from the instrument cluster bezel and pull it out (has 2 spring clips at the bottom, just pull).  Remove the 4 screws holding the cluster in, and remove the cluster.  Make sure the connector is snapped into its slot correctly, push the cluster back in, and reinstall everything.

Are none of the gauges working at all?

they were when i went and picked the car up a week ago just did a oil chang in it and got to looking and the gauges where not working the take is all the way over to the right as fare as it will go and the oil hand is all the way up  but the take will move when u give it gas on down that is but nothing els will work  

Hmm, you may need a new cluster...but maybe someone else has dealt with this before.

what i was thinking but was hopeing some one would know a way i could get around this o well lol hope i can find one some where that came out of a 89 gtu want to keep it close to stock as i can on the inside and out but not under the hood yayou know thanks for the help still going to try what u said and see if it works