Beretta.net

As ya know I have a 90 Beretta, it has the FE7 suspension or what ever. Where is a place to get some quality endlings. My right one is my noise in the car. Turns out the rest of the front end stuff is still in decent shape other then the creeking sound coming from the drivers side front shock mount the shop says.
But where is a good place get the two end links. The job looks fairly straight frwrd to put them on other then dealing with some rust old bolts to break.

will I be able to specify what type of car it is to get the right stuff. My shop showed that they could be ordered in 3 diff types. Are the wrong or does it very on the GT models vrs base model for 1990?

I aint seeing it on their site.

found it.

go to advance auto or autozone and they stock energy suspension components. The endlinks are pretty universal. My energy susp endlinks have been going strong for years. tighten the nuts down on the washers until the bushing bulges slightly and you're set.

daguse5853z wrote:go to advance auto or autozone and they stock energy suspension components. The endlinks are pretty universal. My energy susp endlinks have been going strong for years. tighten the nuts down on the washers until the bushing bulges slightly and you're set.

Not FE7. I got mine at Rockauto and they've been good so far.

I got mine at my local napa. They had them for me the same day.

I wonder how hard it will be to get the orig ones off. I hate jacking this car up with the ground effects on it.

I got my replacement 'ACDelcos' from rockauto today. They are made in south Korea and very cheap design, weights like 1/3 of stock and actually has plastic end caps. I think these POS products will last for a year.. Next time it will be vintage parts or custom made for me then.

I went with the RAYBESTOS units that I saw avail on rockauto. They seem pretty good then again I have no clue what is good or cheap with many suspension parts. I usally go by the name of the maker. I thought RAYBESTOS was a good brand?

just checked mine. MADE IN KOREA wnd they alsi have a plastic cap on the back. Oh well.

Moog usually beefs their stuff up pretty well, for future reference. I know my 2000 Grand Prix GTP uses that style of endlink for the rear bar, and the Moog ones were much beefier than the stock ones they replaced.

Whether or not Moog makes them for FE7, I have no idea.

quick look at their site it appears Moog does not make the FE7 part.

Oh well, so the parts I have are cheaper. Hopefully they last for alittle while.