Page 1 of 3

Ace's Part Inventory - MI EUP USA - Updated Aug 13th

Posted: Sun Feb 05, 2012 8:57 pm
by DTMAce
LOCATION: De Tour Village, Upper Peninsula, Michigan USA, 49725.

Yep you heard correctly. I have a ton of various parts to get rid of. I need to pool some funds, as I have to purchase a replacement for the 95 base later this year.

So to start with tonight, I started an inventory on what I have. I still have several boxes (4 or 5 - I think) of stuff to go through yet in just one building, and that doesn't include the office which has another 3. This thread will contain pics of every item, what they came from (car, who, etc) and as accurate a description of their condition/age I can provide for you. Part numbers will be posted for as many of the items as I can find out about, using a 1999 Mitchell guide as reference. It may take a few days for me to get everything listed on this post before I'm done. Please keep in-thread posts on topic, to the point and brief. I will be editing this paragraph once inventory is current or completely sold out. Items that do not sell here after a time may eventually get listed on Ebay as well. If that happens, a link to the Ebay listing will also be included with the item listed here.


Brief summary of what's expected when purchasing things from this thread:

I will accept PayPal only, as its a safe and easy way to pay, protects both you and me from fraud. PayPal does charge me (and sometimes you) a fee if you use credit cards through it. I usually avoid fees myself by using it directly with my bank, but everyone's comfort level with online purchasing is different. For a proper and safe sale when using PayPal, under the Send Money tab there are sub-tabs. Be sure to use the one labeled Purchase, and its for Goods. This protects you from bad sellers, not that I'm really worried either way. If you know there will be a fee, you can always add to the purchase so that I get the amount we agreed on. (usually PayPal shows the fees, if any)

I do work on a first come, first get basis to a point. If someone says they want to buy an item, then I simply request that they pay for the item within 5 business days. If you want an item, but are unable to pay for it within 5 days, it may get sold to the next interested person. I can be flexible depending on the reason, but you have to speak up. ALL requests to buy an item are to be made in the thread! This is so its publicly noted who asked for what and when. When bouncing back and forth in PMs its easy to get mistaken. Information regarding addresses, names, or other personal information is NOT to be posted in the thread, use PM for that please.

All item pricing are listed as SHIPPED IN USA pricing unless otherwise noted on the actual item description. Unusually large or heavy items are difficult to guess a price for, so I would rather calculate them as needed. Shipping at the moment is limited to Monday, Tuesday, and Friday. And finally my local UPS store is somewhat back in operation, they were down for a couple weeks.. So most things may go UPS, but small, light items may ship USPS. I do not use FedEx. I will combo ship and save you some if buying multiple items. International shipping is extra.

Currently Available Items:
  • Various years - Various fasteners, clips, bolts, nuts, etc. More than I need. Please ask if you are looking for something, depending on weight, $5-10 shipped.
    (01) 1994 Base front bumper (16520556), complete with lower trim (10134430). Red. Great condition, no rips, creases or tears. $50 plus shipping cost.
    (02) 1994 Z26 lower outer deflectors for right and left (22576426-7). Good condition, needs fasteners removed, some scuffs, some dents. $15 each or $20 for both.
    (03) 1994 Z26 drivers side (LH) headlight housing. 1994 Z26, deer damaged outer adjuster housing. $15.
    (04) TYC Aftermarket passenger side (RH) headlight housing. 1996 Base, has some red paint on edge, good shape though. $20. Both for $25.
    (07) Rear side marker lamp housings L&R (5974386-5). Good condition, some flaws or cracking, need cleaned. $10 each or $15 for the pair.
    (08) Rear side marker lamp housings L&R (5974386-5). Good condition, some flaws or cracking, one is missing the hook, need cleaned. $$10 for the pair.
    (09) 1994 Base finish panel (lower filler support) (10103444). Great condition, no cracks, flaws or broken mounts. Red. $30 plus shipping cost.
    (10) Driver's side Belt Reveal w/black insert (dew strip) (22575524-5). Fair condition. Slight cracking, wipe edge is stiff and not very flexible. It was bought in this condition from another member, and I was reluctant to use it. Just wasn't quite what I expected. Needs a good cleaning and maybe some work and it will be fine. My loss at $20.
    (11) 1994 Base carpet stays L&R. Decent condition, need cleaned, one has a small chip in the end. $25 each or $40 for the pair.
    (12) 1994 Base door sill covers L&R. Good condition, no cracking, minor typical scuffs, need cleaned. $25 each or $40 for the pair.
    (13) 1994 Base trunk gasket (10114600). Soft, in good shape. Couple of small tears, but nothing bad. $25.
    (14) 1994 Base AM/FM Stereo (16182691). Tested, works perfectly. $25.
    (16) 1994 Base cargo net kit. Comes with both rails, plastic end caps and net. $25.
    (17) 1994 Base rear view mirror (10203411). Works fine, glass is good, slight discoloration just starting around the edges. Lights work, all parts are there. $20.


Pending Sale Items:
Sold Items:

(05) 1994 Base front marker lamp housings L&R (5974378-7). Not broken, comes with hardware and short harness. $15 each or $25 for the pair.
(06) Front side marker lamp housings L&R (5974382-1). Good condition, some flaws or cracking, need cleaned. $10 each or $15 for the pair.
(15) 1994 Base climate control. Tested, worked fine, lit up. $20.
(18) MRZ Polished Aluminum Front Stut Bar, engraved with "BERETTA". Comes with mounts that allow it to fit best on four cylinder sized engine bay setups. Will not properly mount over a V6 without contact issues with the alternator, as I found out. You can purchase different strut mounts from MRZ to use instead that would allow this bar to fit on a V6 engine setup. It has very close tolerances with hood fit as well with its current setup. Needs a bit of polishing on a few spots, but in really nice shape! $100 shipped US
(19) Brand New Eibach Pro Kit for 1995-1996 Beretta's only (due to the different rear suspension). This kit includes both front and rear lowering springs. $200 + Shipping
(20) Brand New KYB GR-2 Front Struts (1 pair) purchased for a 95-96 year, but I would suspect they will work for any year really. $125 + shipping.
(21) Brand New KYB Gas-Adjust rear shocks (1 pair) for 95-96 year only! $25 + shipping.

Pictures of items (in order with items listed above, available, pending, sold, etc)

Available:
(01)
Image
(02)
Image
(02)
Image
(03)
Image
(04)
Image
(07)
Image
(08)
Image
(09)
Image
(10)
Image
(11)
Image
(12)
Image
(13)
Image
(14)
Image
(16)
Image
(17)
Image

Pending:



Sold:

(05)
Image
(05)
Image
(06)
Image
(15)
Image
(18)
Image
(19)
Image
(20)
Image
(21)
Image

Re: Ace's Part Inventory - MI EUP USA - Updated Feb 6th

Posted: Mon Feb 06, 2012 3:07 pm
by Styluss
THAT, is how you do a for sale thread!

Re: Ace's Part Inventory - MI EUP USA - Updated Feb 6th

Posted: Mon Feb 06, 2012 10:35 pm
by DTMAce
DTMAce wrote:Please keep in-thread posts on topic, to the point and brief.
:burn: :lol:

Re: Ace's Part Inventory - MI EUP USA - Updated Feb 6th

Posted: Tue Feb 07, 2012 8:29 am
by themadness
how much of the red interior stuff do you plan on getting rid of?

Re: Ace's Part Inventory - MI EUP USA - Updated Feb 6th

Posted: Tue Feb 07, 2012 10:44 am
by DTMAce
What red interior stuff? All I have is a red base rear seat back.

Re: Ace's Part Inventory - MI EUP USA - Updated Feb 6th

Posted: Tue Feb 07, 2012 10:52 am
by themadness
ok. i need the cover that goes over where the seatbelt goes into the door panel.

Re: Ace's Part Inventory - MI EUP USA - Updated Feb 6th

Posted: Tue Feb 07, 2012 10:55 am
by DTMAce
Well, if I come across any down the road, I will let you know.

Re: Ace's Part Inventory - MI EUP USA - Updated Feb 7th

Posted: Thu Apr 26, 2012 10:56 pm
by DTMAce
Just a small bump, to remind people of this stuff, I need to get rid of things! I will be adding more soon too.

Re: Ace's Part Inventory - MI EUP USA - Updated Feb 7th

Posted: Thu Apr 26, 2012 11:43 pm
by SummitBalt08
I'm interested in the base climate control. Shoot me your paypal and price shipped in a pm thanks

Re: Ace's Part Inventory - MI EUP USA - Updated Apr 26th

Posted: Fri Apr 27, 2012 7:08 am
by Bman Gtz
I am interested in pic 6 and 7, the sidemarkers if they aren't sold, let me know Ace.

Re: Ace's Part Inventory - MI EUP USA - Updated Apr 26th

Posted: Fri Apr 27, 2012 8:29 am
by DTMAce
I am still holding those ones for you man.. Or did you forget? lol

Re: Ace's Part Inventory - MI EUP USA - Updated Apr 26th

Posted: Fri Apr 27, 2012 9:13 am
by 3X00-Modified
Want set 08 of side markers!

Scratch that, its my R side thats cracked... Damn!

Re: Ace's Part Inventory - MI EUP USA - Updated Apr 26th

Posted: Fri Apr 27, 2012 9:28 am
by Bman Gtz
I totally forgot, lol, and sorry Jon.

Re: Ace's Part Inventory - MI EUP USA - Updated Apr 26th

Posted: Fri Apr 27, 2012 9:28 am
by DTMAce
lol

I may have others around here, let me check on that later this weekend, but I think we talked about that before Jon. However if you are patient, I will be pulling the current set of LED markers off the Z in the next couple weeks or so... ;)

Re: Ace's Part Inventory - MI EUP USA - Updated Apr 26th

Posted: Fri Apr 27, 2012 9:36 am
by 3X00-Modified
Ok just let me know, I still haven't even looked at the red car yet, those could be just fine.