Beretta.net

Some of the pics most people have already seen but i have more as well. im almost done. i would 2 more weeks. i just hate waiting for things to arrive. that takes the most time.

This is some of the crossover. as you can see im not the best welder. my first 2 hours of welding is here.

[/URL]http://img.photobucket.com/albums....103.jpg[/URL]

This is the croosover pretty much done. angle grinder is your friend, i cleaned up some welds

http://img.photobucket.com/albums/v729/ ... peed/Turbo%
20Project/EX101.jpg

These are the crossover pics of it installed and complete.

http://img.photobucket.com/albums....110.jpg

http://img.photobucket.com/albums....111.jpg

Pic from today and about 2-3 hours. everything is not welded all the way but its basicly done.

Here is my flange i made up from 3/8" this steel. My skills have gotten better i think.

http://img.photobucket.com/albums....115.jpg




Clearence for my intake. I have alot of room


bad angle but i have about 1/2" between the 2.





Here is the overall view so far. My welding skill are improving LOL

Pretty cool Man!  

It is my opinion that you need a MUCH larger turbo though..............

That's great!

 


What's in mind for wiring?

Bigger turbo???I rembered he said it was from a GMC Syclone.

What will power will do. Your welds are getting better..mine keep getting worse    .

I still wish you'd monted the turbo suport braket on the trans or engine.. Hope you have solid monts    .

Turbo should have been mounted to the engine/tranny.  You will break something.

Looks like good progress otherwise.

Darn that was a quick update...   more turbos in the familia...
Cool!!

Rex is right. That turbo has to be able to move with the engine/trans.

Otherwise it will be pulling everything apart.

You're still a better welder than me though.

Eric

Quote (TurboGTU @ Apr. 30 2005,02:36)Bigger turbo???I rembered he said it was from a GMC Syclone.
Exactly.  He needs a bigger turbo ÂÂÂ


Hey Berettaspeed, what are you using for injectors with that?

Rex is right, if you have much engine movement, I don't think those springs are going to give you enough flex. Or do I remember you saying you had made solid engine mounts? If not, I think if you fill your mounts sith poly and use a tie down strap, the flex in the springs will probably be enough. I know my engine doesn't move AT ALL.

What are you doing for a wastegate?

i should have enough movement.  the engine doesn't move that much. i was impressed with how much it really moves. I can jack the engine up and down and watch it move. so i think it should be enough.

yes the turbo is from a 91 GMC syclone. 550cfm is enough for me. I can always upgrade to a 20G wheel easy. which again is more than enough for me.

I  don't know if it will work yet but i can a couple of set up ideas on the fuel system. i still need to buy a fuel pump. so i won't say until i get it working. what i have now should work fine though. not perfect but will do.

I will be filling all my mounts with poly. i heard from a couple people it works well.

I will be doing alot more once i get it running so everything works and looks nicer.I don't want to spend the money on top notch things if i can never get it to run. you know what i mean. i want to get something later that i can change everything dealing with ECU and such (stand alone). Right now i have a seperate computer that reads boost and supplies fuel based on that. but its not a FMU.  i don't know what its called though, i got it from a friend. i will be using seperat injectors with this for now. so it will look sloppy.

Quote (wicked-irocz @ Apr. 30 2005,15:58)What are you doing for a wastegate?
The syclone turbo has an internal wastegate. If you look close you can see the arm for the wastegate puck on the exhaust housing. It just doesn't have the actuator bolted on to it.

Quote (berettaspeed @ Apr. 30 2005,16:58)yes the turbo is from a 91 GMC syclone. 550cfm is enough for me.
You say that now, but.....................

Just wait until you are boost addicted! ÂÂÂ

I can't wait to see that thing run. We will have to get together sometime this summer and go racing.

http://www.syty.org/old/modlist.html

at the bottom are some turbo upgrades i could do later. the 20G wheel i can get upto 650cfm.



but yeah i agree with you, you can never go faster enough. its a drug. LOL

Yes, we all need more speed. Always. What are you using for an intercooler?

Poly will help a bunch on the mounts.

Good luck and let us know if you need any help with anything.