Page 1 of 1
Seal leaks in a can
Posted: Thu Mar 29, 2012 4:04 pm
by DOHC_tuner
Well with our Berettas known to leak and have water found in the interior. As anyone tried using the spray can that sprays out liquid rubber. I attempted to seal my water leak with the common 3m black stuff but seems it only fixed the pass side. And in the process I managed to break the housing for the blower....I tried my best to cover up the cracks and what not.

Re: Seal leaks in a can
Posted: Thu Mar 29, 2012 4:32 pm
by Styluss
I have always wanted to try the "as seen on TV" stuff. You know, the commercial where the guy installs a screen door on the bottom of a boat with just a spray sealer? Yeah, that stuff. Seems to be top notch!
Seal leaks in a can
Posted: Thu Mar 29, 2012 4:35 pm
by Ozzwoman9
Used flex seal around a few places in my house and so far it's worked great! Got rid of a few seeping leaks between some concrete blocks!
Sent from my iPhone while skydiving.
Re: Seal leaks in a can
Posted: Thu Mar 29, 2012 6:22 pm
by Money pit Beretta
Sure would like to see if it can work on a car. The rubber roofing stuff sure doesn't.
Re: Seal leaks in a can
Posted: Thu Mar 29, 2012 11:54 pm
by beretta
ive been thinking of getting some of that flex seal stuff and trying it on the rivets on my aluminum fishing boat.
my 88 has a few strange leaks though.. was on the passenger side and i took everything apart and used urethane windshield caulking, on the driver side it leaks around the steering column.
In the trunk there is no rust anywhere, all the original sealant is still there and not cracked. it leaks in the strangest place... its leaking on the drive side where the 1/4 panel meets the trunk pan in the back corner behind the tail light down in that corner. i have urethane all around the trunk on the top and behind the tail light and it still just runs in there when it rains.
its been parked since last fall and still currently parked from winter and been covered the whole time to keep water out, one of those things i have to get to soon before i start driving it again..
the flex seal stuff seams like it might be good for a try anyways. i was going to see if i can get seam sealer color matched so it doesnt look like hell on the inside of the trunk and do all the seams with that and hope to stop the dam leaks lol. my 96 hasnt started leaking yet, my 88 has NO rust at all visible anywhere and i dont understand why it keeps leaking its nerve racking trying to get the leaks stopped. the fire wall is kinda a pain to do when the engine is in the only real way to get it sealed 100% is to pull the engine and go nuts at it.
Re: Seal leaks in a can
Posted: Fri Mar 30, 2012 3:24 pm
by Styluss
Check the seal on your rear windshield. I had a spot where it wasn't quite complete and it let water in, it trickled down into the trunk and then into the spare tire well and pooled up. It took me forever to figure this one out!
Re: Seal leaks in a can
Posted: Mon Apr 02, 2012 9:10 am
by 3X00-Modified
Re: Seal leaks in a can
Posted: Mon Apr 02, 2012 9:25 am
by beretta
Styluss wrote:Check the seal on your rear windshield. I had a spot where it wasn't quite complete and it let water in, it trickled down into the trunk and then into the spare tire well and pooled up. It took me forever to figure this one out!
ya i need to take the time and remove all the trunk carpet and start spraying it with water. it leaks in the front too on the driver side it just pours in around the steering column. im now thinking thats coming from the brake booster or around the column.
I didnt notice the rear until i herd water plashing around and my tire well was full lol. .
Ive sealed the cowl part all up and the heater box. but like 3X00 just said thats not where it leaks from.. now i got another job to do ... thanks lol..
its still covered up and been parked so its no rush for me but id like to get it done in my spare time so i can start driving it again i miss my 5 speed.