Beretta.net

Doing some clean up and am listing some items to make room for more clutter lol. PM me for more details and questions. Money order or Cash only due to the fact that I had to recently report ID theft and closed that account in the process of other important accounts.
Shipping is at the buyers expense. Prices do not include shipping, local pick up can be arranged. Once all monies is cleared, goods will then be hauled off to be shipped out.
If you're at BerettaFest you might consider a detour on the way home!

Quad 4 Ignition Parts, Fuel rails - 130.00 for all items


90 Beretta Hubs - 60.00 for all items


Quad Intake with TB - 50.00
Quad Throttle Boxes AS-IS - 20.00 Each
Quad Jack Shaft (IIRC came from a 90 GTZ) - 75.00
Quad Accessory Bracket - 30.00 Each


Quad 4 955 head - I can't see anything visually wrong with it. Comes as is - 160.00
Quad 4 086 head - Has cracks in the typical spots, is ported, comes bare - 90.00


Super light weight JBloeds 16"x 7" - 1100 For the Set.


3500 Upper Intake Manifold - 40.00 or Trade for a LNJ Upper Intake


Quad water pumps and starters - 200.00 for it all


Quad 4 Header - 460.00 Details are in the Picture. SOLD


Quad 282 trans - 125.00 Condition is unknown


All items are used and is sold without warranty.

90 for a cracked head? There is a beretta with a trunk full of cracked quad heads at the junkyard.

I'll explain this only because I want to.

The yards here want 140.00 for any bare 4 cylinder head no matter the condition. Or you can go to the local pull your own parts and do it for 110.00 for a bare head (no valves or springs). Those heads you will find it will not be ported and will be very dirty. These heads are pretty clean and the 086 head is ported.

Shipping quote for the 3500 upper to 28027 please!

20-21 bucks for shipping

Can do a big package deal for any serious buyers. Pm me to negotiate.

Going to list locally soon.

do you have the entire w40 bottom end of the q4 engine? lost an oil pump and need the bottom end rebuilt/replaced

tvc3-gtz wrote:do you have the entire w40 bottom end of the q4 engine? lost an oil pump and need the bottom end rebuilt/replaced

Just so you know, the ONLY difference between an LO quad 4 short block and an HO (LG0, W40, W41) short block are the pistons... Even one from an SOHC engine will work for you!

tvc3-gtz wrote:do you have the entire w40 bottom end of the q4 engine? lost an oil pump and need the bottom end rebuilt/replaced

I have a HO bottom end, but it'll need a gone thru for sure. PM me if interested.

If any one is interested in a packdeal only, I will let the rims and header go for 1100+shipping. Deal is only good until the 11th.

Might be listing a 5 speed swap kit to and a cowl hood.

5 speed swap sold cowl hood is pending.

All parts in this thread are up for parting out.

The reason I am looking for specifically an H/O w41 bottom end would be for the extra power, since I have to totally disassemble the engine anyways

Pm'd all inquiries