Nukkinfuttz Turbo GTZ
-
- Registered User
- Posts: 64
- Joined: Fri May 13, 2011 10:51 pm
Nukkinfuttz Turbo GTZ
Im new here, but probably know you Quad 4 guys from elsewhere.
here is the HX35 on its maiden voyage at 8 PSI. I have tuned this in well, I'll take it to 15 PSI on my next days off (in about a week).
http://www.youtube.com/watch?v=LBsZF9UkkrQ
8 PSI on this turbo is WAYYYYYY more powerful than 15 PSI on the Roots M90 for sure! I did blast it upto 15PSI on accident and it was very impressive, I cant wait to get back there. Im targeting 20PSI when its all said and done, as that is about the limit of my MAP sensor.
here is the HX35 on its maiden voyage at 8 PSI. I have tuned this in well, I'll take it to 15 PSI on my next days off (in about a week).
http://www.youtube.com/watch?v=LBsZF9UkkrQ
8 PSI on this turbo is WAYYYYYY more powerful than 15 PSI on the Roots M90 for sure! I did blast it upto 15PSI on accident and it was very impressive, I cant wait to get back there. Im targeting 20PSI when its all said and done, as that is about the limit of my MAP sensor.
Re: Nukkinfuttz Turbo GTZ
am i jealous much? Yes. Yes I am.
95' BRM Z26. cammed/ported 3400/3500 Hybrid. HM282, OBD2, Garret T3/T04E 60 Trim, IC.heavywoody wrote:Beretta, fast, reliable, and cost effective are words that should not be used in the same sentence.
Re: Nukkinfuttz Turbo GTZ
For some reason, I was wondering where you were. Welcome to the site! Keep us updated.
- woody90gtz
- Registered User
- Posts: 4705
- Joined: Thu Jul 11, 2002 8:45 pm
- Location: Walton, NY
- Contact:
Re: Nukkinfuttz Turbo GTZ
Clean looking car.
91 "SS" - WOT 3400/5spd - 13.29@101.6 - World's fastest N/A FWD Beretta
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
- scannerman
- Registered User
- Posts: 276
- Joined: Wed Jul 02, 2003 4:45 pm
- Location: Illinois
Re: Nukkinfuttz Turbo GTZ
nice looking setup.
2009 Cobalt SS LNF
1995 Z26 3100 auto <--- Totalled
1989 base 2.8 auto <-- Sold
1995 Z26 3100 auto <--- Totalled
1989 base 2.8 auto <-- Sold
-
- Registered User
- Posts: 677
- Joined: Thu Apr 26, 2001 3:11 pm
- Location: Charlotte, NC
Re: Nukkinfuttz Turbo GTZ
Now thats literally woo woo!
2005 Chevrolet Corvette Z51
2005 GMC Sierra 2500HD
2014 Chevy SS
2005 GMC Sierra 2500HD
2014 Chevy SS
- KFLO 93 GT
- Registered User
- Posts: 846
- Joined: Thu Jul 25, 2002 2:46 am
- Location: Iowa
- Contact:
Re: Nukkinfuttz Turbo GTZ
Hell yeah, I had been wondering where you went. Glad to see that bitch is boosted now!
Is the bottom end built?
Was this thing supposed to be getting twin M90s at one time, or am I smoking too much crack for a Saturday morning?
Is the bottom end built?
Was this thing supposed to be getting twin M90s at one time, or am I smoking too much crack for a Saturday morning?
93 GTs
- SuzukiGhostRider
- Registered User
- Posts: 2464
- Joined: Tue Feb 12, 2008 4:07 am
- Location: Milan NM
- Contact:
Re: Nukkinfuttz Turbo GTZ
Yeah, he built the bottom end for boost, just he S/C'd for a while and finally said screw it and went to Turbo. He's been very active on the Q4F. Just have to know where to find Shawn.
-
- Registered User
- Posts: 64
- Joined: Fri May 13, 2011 10:51 pm
Re: Nukkinfuttz Turbo GTZ
Yup, been runnin megasquirt for bout three years now. It opens up so many possibilities, you can do anything you want and never have to worry if you will be able to tune it or not. I love it
You still have me confused with combatphil who was always "gonna" do this and gonna do that but never actually did any of it. I actually did make a streetable M90 quad but it just wasn't all it was cracked up to be. So I tore it out and went turbo.
Now having experienced both supercharger and turbo first hand, I'd never consider going SC'd again, its a total waste when turbo will provide sooo much more power with the same investment.
You still have me confused with combatphil who was always "gonna" do this and gonna do that but never actually did any of it. I actually did make a streetable M90 quad but it just wasn't all it was cracked up to be. So I tore it out and went turbo.
Now having experienced both supercharger and turbo first hand, I'd never consider going SC'd again, its a total waste when turbo will provide sooo much more power with the same investment.
- SuzukiGhostRider
- Registered User
- Posts: 2464
- Joined: Tue Feb 12, 2008 4:07 am
- Location: Milan NM
- Contact:
Re: Nukkinfuttz Turbo GTZ
Supercharger is more interesting on a bigger engine...Quad4 loves turbo. Btw Very Nice setup and it seems relatively easy to boost a QUad 4.nukkinfuttz wrote:Yup, been runnin megasquirt for bout three years now. It opens up so many possibilities, you can do anything you want and never have to worry if you will be able to tune it or not. I love it
You still have me confused with combatphil who was always "gonna" do this and gonna do that but never actually did any of it. I actually did make a streetable M90 quad but it just wasn't all it was cracked up to be. So I tore it out and went turbo.
Now having experienced both supercharger and turbo first hand, I'd never consider going SC'd again, its a total waste when turbo will provide sooo much more power with the same investment.
Beretta 96 3500 - 14.981@ 93.32
65MM thorttle body, Crank trigger 97 venture ECM and Dhp powrTuner
65MM thorttle body, Crank trigger 97 venture ECM and Dhp powrTuner
-
- Registered User
- Posts: 64
- Joined: Fri May 13, 2011 10:51 pm
Re: Nukkinfuttz Turbo GTZ
Yeah, Ross 8.5:1 .020", Eagle, ARP top and bottom.... and a stock Felpro HG.KFLO 93 GT wrote: Is the bottom end built?
-
- Registered User
- Posts: 677
- Joined: Thu Apr 26, 2001 3:11 pm
- Location: Charlotte, NC
Re: Nukkinfuttz Turbo GTZ
Nice! Well built, i love it.
I noticed you have 2 nipples on your megasquirt.(possibly the gayest statement I have ever made) Are you using a second map for baro correction?
I noticed you have 2 nipples on your megasquirt.(possibly the gayest statement I have ever made) Are you using a second map for baro correction?