Starting problem

Have a flashing light? Gauges acting funny? Bad idle? Get your problems solved...
BerettaMN
Registered User
Posts: 186
Joined: Fri Feb 18, 2011 11:16 pm
Location: St. Paul Mn
Contact:

Re: Starting problem

Postby BerettaMN » Sun Jun 24, 2012 8:51 pm

Are you getting spark when it's cranking?



DownSouth
Registered User
Posts: 57
Joined: Fri Jun 04, 2010 11:07 am
Location: Ft. Lauderdale

Re: Starting problem

Postby DownSouth » Thu Jul 05, 2012 10:01 am

BerettaMN wrote:Are you getting spark when it's cranking?


No spark


Black 1993 3.1L Chevrolet Beretta

User avatar
3X00-Modified
Administrator
Posts: 10852
Joined: Thu Jul 05, 2007 9:18 am
Location: Brooklyn CT

Re: Starting problem

Postby 3X00-Modified » Thu Jul 05, 2012 10:08 am

Move to the ICM or ohm out the coils to make sure they are not bad.

Also check the wire that feeds the crank sensor to the ICM... that may have been damaged somehow.



DownSouth
Registered User
Posts: 57
Joined: Fri Jun 04, 2010 11:07 am
Location: Ft. Lauderdale

Re: Starting problem

Postby DownSouth » Sat Jul 07, 2012 9:04 am

Problems solved. The starting problem (see post 1) was the ignition switch (http://www.autozone.com/autozone/parts/1993-Chevrolet-Beretta/Ignition-Switch/_/N-izl6nZ9n859) and the second problem was the ICM. All is good now. Thanks for the input.


Black 1993 3.1L Chevrolet Beretta

LisaMartinez
Registered User
Posts: 35
Joined: Sun Sep 29, 2019 6:35 am
Location: San Jacinto, CA
Contact:

Re: Starting problem

Postby LisaMartinez » Thu Mar 05, 2020 12:49 am

I'm having the same problems



LisaMartinez
Registered User
Posts: 35
Joined: Sun Sep 29, 2019 6:35 am
Location: San Jacinto, CA
Contact:

Re: Starting problem

Postby LisaMartinez » Thu Mar 05, 2020 12:54 am

Yes even with an inline spark tester



LisaMartinez
Registered User
Posts: 35
Joined: Sun Sep 29, 2019 6:35 am
Location: San Jacinto, CA
Contact:

Re: Starting problem

Postby LisaMartinez » Mon May 25, 2020 12:43 pm

Yes I'm getting good spark even with the inline tester




Return to “Diagnostic Help”

Who is online

Users browsing this forum: No registered users and 3 guests