Page 2 of 2
oil preasure switch
Posted: Fri Apr 04, 2008 10:23 pm
by 6r8ph1X
cool, i found it, i'm just wondering how to take off the starter lmao!
oil preasure switch
Posted: Fri Apr 04, 2008 10:38 pm
by Rodville
We are all talking about 91+ right? If memory serves all Beretta's 88-90 had a full cluster so swapping the sensor to get the gauge to work wouldn't be an issue.
oil preasure switch
Posted: Sat Apr 05, 2008 1:36 am
by 6r8ph1X
k guys i got the starter off, then i got the old sensor off. all smooth from here, now i get the new sensor on and go to pull the ratchet off and the black cover comes off of the sensor with my RATCHET!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!  ****!!!!!!!!!!!!! (now i got to go back to autozone at 8 in the morning just to tell them, ummm this didn't work when i put it on, can i get a replacement? god, this sux ballz      ÂÂÂ
oil preasure switch
Posted: Sat Apr 05, 2008 1:56 am
by SuzukiGhostRider
LOL, the woes of home wrenchin' ftl sometimes ,eh bud?
oil preasure switch
Posted: Sat Apr 05, 2008 3:30 am
by 6r8ph1X
yeah, just love when this stuff happens lol
oil preasure switch
Posted: Sat Apr 05, 2008 3:38 pm
by Money pit Beretta
Wow! I once changed my plugs and then went to change the PCV. That thing was half in, so why not pull harder? It came out with half the hose. It was almost 8PM on a Sunday, lucky for me the parts store had the upper intake gaskets and the hose. I had to get it done so I could go to work the next day at 7AM. Yea, it happens.
oil preasure switch
Posted: Sat Apr 05, 2008 6:58 pm
by snowblindburd
I used an adjustable wrench to install mine, worked pretty well.
oil preasure switch
Posted: Sun Apr 06, 2008 1:17 am
by 6r8ph1X
ok all, i got it installed and everything works great! I'm very happy now that i have a functioning gauge. My pressure is anywhere from half to 3/4 on the meter. YAY good pressure!
oil preasure switch
Posted: Sun Apr 06, 2008 10:45 pm
by snowblindburd
Very cool man. I did mine but it's been acting kinda funny. It shows up around 3/4 all the time and doesnt vary much. I'll see what it says after an oil change before I go nuts thinking about what could be wrong.
I'm glad you got it in and working .
oil preasure switch
Posted: Mon Apr 07, 2008 1:45 am
by 6r8ph1X
Thanks Much all!!!!!
oil preasure switch
Posted: Mon Apr 07, 2008 2:57 am
by SuzukiGhostRider
Glad to hear it all worked out for you 6!
oil preasure switch
Posted: Tue Apr 08, 2008 9:59 pm
by steve3408
What else needs to be done to put in a full cluster and have it all work? (besides the oil press sender)
'95 Z cluster into '95 base model.
oil preasure switch
Posted: Tue Apr 08, 2008 10:04 pm
by snowblindburd
That's it.  Oil pressure is the only guage that won't work until you switch sender units. Unless you wanted to know the specifics of changing it out.
If so its just six screws under the cluster bezel, then you kinda yank that out, then the cluster you unscrew four screws holding it back then tug on it till it comes out. new one just clips in and reverse the process to install.