Beretta.net

Is that piece in good condition?

Well, here are some pics of it:



10 bucks shipped. Unless you need anything else. Let me know, send me a PM.

Thanks.

Update for everyone else:

I'm slowly getting things pulled off the car. I have already pulled the mirrors, door handle, most of the stuff off the driver's door already, all the rear lighting fixtures, etc. Been a bit of a pain. Working on getting the carpet stays/door sill covers off, all of the bloody screws are rusted beyond use, so attempting to drill them out without screwing the covers up. Driver's side is unbroken, pass side has a chip out of the back outer end/edge. But overall not bad, once they are cleaned up I think. Both door panels are simply trash. They crumbled just trying to get them off of the doors. Once I get in far enough, I need to pull a seat out, and then work to get the console out, so I can get the shifter stuff removed. Thanks for being patient guys/gals.

And by all means, keep asking for stuff. The more I can get removed, the more we save for other beretta's, and the more we keep running on the road. I hope to get a few more requests filled and ready for approval by Thursday.

More pictures, these are mostly for MoneyPitBeretta....

Headlights:













And shots of the door handle. I have to pull the sail panels tomorrow, give them a look over too.









Not overly happy, the handle is in great shape physically, but if it were me, I would have it repainted. The handle housing as you can see is even worse. But this is fixable, just need it striped of paint, and re paint. It will be fine. Or just swap the handle portion. I still have to remove the lock for another member yet, so that won't be there when its shipped. I figure in its present state its worth, eh... 10 bucks. I know they go a lot higher when the paint is good on them.

Headlights aren't too bad, the insides don't look particularly bad at all, may need blown out a bit. If the outsides were polished it would be 10 times better then they are. Still pretty set on wanting 50 out of these. As I said, if its too high, that's ok, they will go for a new never-done-before project. If you need them, no worries. I can always find another set.



Anyways, look them over, let me know for sure on these guys, hopefully I will have the sail panels out tomorrow, so you can render judgement on those. Thanks MPB

Damn you want them that bad ACE? I will not take something you want. Oh man they do look good though. You have been very nice on this and it's twice that you said that you want them for a project. Bastard, keep them(lol), jerk(lol), thanks for the photos.

It does look like that housing is straight on the top, so that's not so bad. The one I have has an arch. I will use my own lock anyway.

I have no issues with parting with them man. If you want them, no problem. Just that they are worth 50 to me.. lol

If I keep them, then I have to polish them, do my "adjustment" and then slap them into a beretta and see how many people go gaga over them. LOL Of course, I could do all that, then sell them to you after they are "adjusted" LMAO But they won't be 50 bucks anymore.

Up to you. You do want the handle though right, so that's good to go? SHOULD have everything else out tomorrow. Trying to get this easier stuff out of the way, so I have more room to work on the shifter stuff. That is going to be a PITA. LOL

Yea thats it! I will take it! just shot me your paypal address.

Also how are the inside dew stripes that also hold down the the door panels?

Just wanted to say that I received my parts! Thanks! Very well packaged and exactly as described!

Ok hold on to them for me. Plan to go to the JY and check this weekend. Sure don't want to buy your project ones and then find some. It's kind of a long shot that I can find some anyway, but I'll try.

SummitBalt08 wrote:Just wanted to say that I received my parts! Thanks! Very well packaged and exactly as described!

Glad to hear it! Your welcome!

Money pit Beretta wrote:Ok hold on to them for me. Plan to go to the JY and check this weekend. Sure don't want to buy your project ones and then find some. It's kind of a long shot that I can find some anyway, but I'll try.

Sure, no problem.

OK. I will be back home on Sunday, hope to be yanking more stuff out. Many of your part requests have already been pulled. Will update most of you come tomorrow evening, or Monday.

By all means, those of you still needing anything, get in and ask soon! Once I'm down to 20 days remaining, stuff that hasn't been asked for is going to start hitting ebay. I will list links here as I list them there. Get in now and get the best deals/parts asap!

Thanks guys!

Ok, I have updates:

S33d1nc0rs1ca:











I believe I have all your stuff pulled. You also get the plastic panels, and the insulation piece for the mirrors, and the map sensor. I will assume its good, but I have no idea, so that is a gamble. Will PM you a price shortly.

Amateur:



All I want is 10 bucks shipped. Send to my paypal (first post)

NMBeretta: I have pulled the inner dew strips, they look pretty good!







If that works for you, let me know. Will PM you a price shortly.

And MoneyPit!







Let me know if that is good to go. I will PM you a price shortly!


More to come later this week as I get things removed!

Make sure you guys process your paypal payments using Gift. Paypal takes about 60 cents out of every 10 bucks earned using goods/services. I really don't want to be nitpicky, but that adds up.. lol

Its either that, or add a 60 cents per 10 bucks to cover it. But if you choose it as a gift, they don't deduct from it. The downside is they do not offer tracking or shipping services. Big deal. I wouldn't ship through them anyway, as going through the UPS store here locally is a hell of a lot cheaper.

Thanks everyone!

Payment sent for all. Thanks man. Yeah no luck on the JY headlights.
Got some metal door handle side covers(the ones on the body) and another Cavy STB.

Sent you a PM for your addy! lol If I'm lucky, I might catch UPS today yet!

Amateur, your locks have already been shipped, USPS first class.

Got it, sorry about that.
You need a STB?

Sorry. STB? lol Not up to speed on that one.