Page 1 of 1
New to the site.Looking for Dodge neon rear disc set up
Posted: Wed May 29, 2019 10:27 am
by JCOLEZ26
My name is Justin Coleman.New to the site.I have a 1994 beretta Z26 with a 3800 supercharged.Will try post some pics.Looking to attend the beretta fest this year.Will be my first.Hoping someone may be able to help me out.Looking for a rear disc set up off a neon,so i can finish my conversion.Having a hard time here in Michigan finding anything.Any help is much appreciated.
download/file.php?mode=view&id=7001
download/file.php?mode=view&id=7000
download/file.php?mode=view&id=6999
Re: New to the site.Looking for Dodge neon rear disc set up
Posted: Thu May 30, 2019 5:21 pm
by heavywoody
Hey Justin, welcome! I remember talking to you in Milwaukee last year, or maybe it was your friends, but somebody showed me these pictures of the cars.
Do you need just the brackets? Or everything (pads/rotors/calipers/parking hardware/parking shoes/etc)?
Re: New to the site.Looking for Dodge neon rear disc set up
Posted: Thu May 30, 2019 5:57 pm
by JCOLEZ26
Looking for just the brackets and backing plates. Plan on doing all new brakes parts.
Re: New to the site.Looking for Dodge neon rear disc set up
Posted: Fri May 31, 2019 12:59 pm
by Rettax3
Welcome to the site, Justin! Nice to see another 3800 S/C Beretta. Yours looks like a Series 2 L67? I see you changed your S/C pulley, what PSI are your running? Very cleanly built car, nice job!
Re: New to the site.Looking for Dodge neon rear disc set up
Posted: Fri May 31, 2019 4:34 pm
by JCOLEZ26
Thanks, yeah running a L67 with a gen 5 charger.its also cammed,ported heads and lower intake.Running a 3.2 pulley for now.Still needs to be fine tuned.Around 10-12 pounds of boost.
Re: New to the site.Looking for Dodge neon rear disc set up
Posted: Tue Jun 04, 2019 5:25 am
by Browser
Sorry for hijacking, but what were these holes for on the neon bracket? I have modified brackets and thinking to weld them shut, as they are over the rear axle mounting point (dust will get in).
Re: New to the site.Looking for Dodge neon rear disc set up
Posted: Wed Jun 05, 2019 11:01 am
by 3X00-Modified
Those holes were for an ABS sensor on the Neon...
Re: New to the site.Looking for Dodge neon rear disc set up
Posted: Mon Jun 10, 2019 5:46 am
by Browser
3X00-Modified wrote:Those holes were for an ABS sensor on the Neon...
Ok thanks. Then they are going to be filled
Re: New to the site.Looking for Dodge neon rear disc set up
Posted: Tue Jun 11, 2019 5:03 pm
by JCOLEZ26
Found some brackets and backing plates.
Some info for everyone.found a lot of the Chryslers cars came with the same rear caliper brackets.Mine are off a 2002 300m.Still need to machine the brackets the same as a neon.I modified my backing plates so the rotor didnt have to be spaced out with washers.Cause my wheels are already in the
edge.
download/file.php?mode=view&id=7006
download/file.php?mode=view&id=7005
download/file.php?mode=view&id=7004
download/file.php?mode=view&id=7003