Page 1 of 1
External crank trigger
Posted: Sun Aug 15, 2010 1:26 pm
by 1988GTU
After some drive time the unit fell apart on me and I luckily had someone to lend me there machine screw from there kit... Like a Homer Simpson, I totally lost theres somewhere within the cracks of the pavement over the course of a few days... So my question to those that have access to there's can someone tell me the thread/pitch of the screw that hold the smaller billet adjustable bracket to the fixed unit?
To clarify: I
do not need the info for the CPS sensor screw.
Thanks
Re: External crank trigger
Posted: Sun Aug 15, 2010 9:27 pm
by 1988GTU
Ended up going to the hardware store and finding one out of pure luck in stainless.
1/4 x 20 x 1 with a SS locking washer.
Re: External crank trigger
Posted: Sun Aug 15, 2010 10:18 pm
by Barry
Loctite!
My, and many others crank sensors have come loose
Re: External crank trigger
Posted: Sun Aug 15, 2010 10:57 pm
by 1988GTU
I used loctite.. Don't know what else to have tried other than super glue!
Re: External crank trigger
Posted: Mon Aug 16, 2010 1:43 am
by Asylum
Mine came loose and caused me all kinds of grief
LOCTITE that Mother!!
Re: External crank trigger
Posted: Mon Aug 16, 2010 11:01 pm
by 1988GTU
Let's hope it just doesn't come out again. It really created for a funky tune situation as it came loose.