Page 1 of 1
2.8
Posted: Tue Feb 27, 2007 5:04 pm
by Guest
just wanting to know what i would need to do the swap on a 2.8 to put the 3400 top end or the 3100 top end on the 2.8 plz some one help lol ÂÂÂ
2.8
Posted: Fri Mar 02, 2007 7:36 pm
by wicked-irocz
Wheres chris at?
you would need 2000+ (for best performance) 3100 heads, upper intake, lower intake, TB, beretta 3100 throttle cables, etc.
Check out 3400swap.com
2.8
Posted: Tue Mar 06, 2007 9:44 pm
by MY91GT(Z)
and if ur decent w/ car it should take u bout days worth of work
2.8
Posted: Mon Mar 12, 2007 12:11 am
by IsaacHayes
Top end swap you need heads on up. 3400 stuff will work or 2000+ 3100 (94-99 3100 is small port stuff and less power)
You will also need custom length pushrods.
www.domesticcrew.com and
www.60degreev6.com search and read up.....
2.8
Posted: Mon Mar 12, 2007 6:57 pm
by wicked-irocz
(IsaacHayes @ Mar. 11 2007,23:11)QUOTE3400 stuff will work or 2000+ 3100 (94-99 3100 is small port stuff and less power)
Im pretty sure the 3400 heads have to large of a chamber to seal on a 2.8, thats why I said 2000+ 3100.
2.8
Posted: Mon Mar 19, 2007 5:57 pm
by IsaacHayes
3400 and 2000+ 3100 heads are the same.
It's the 3500 heads that won't work on a 2.8/3.1/3100 bore.