cruise control does not work
cruise control does not work
So guys my cruise controle isnt working at all so i want to fix this now. I already checked all vaccum lines and theyre all good. I also checked the fuse and throttle linkage on the cruise controle "servo". So what do you think what part causes this fail? The cruise control modul maybe? doesnt seems like there are much options... the modul or the servo...?
Also, i thought about i should check for power on the connector of the cruise servo but i dont know if there is always power or just when going above 60kmh so the cruise control would work? As i know they work right at 60kmh, thats where it worked on my GTZ.
Also, i thought about i should check for power on the connector of the cruise servo but i dont know if there is always power or just when going above 60kmh so the cruise control would work? As i know they work right at 60kmh, thats where it worked on my GTZ.
Re: cruise control does not work
Oh and i also swapped in another cruise/turn signal lever. still does not work.
Re: cruise control does not work
Cruise control is run off of vacuum. Check the lines and make sure they're still connected.
95 Beretta Z26, 300,000 mile daily driver
92 Cavalier Z24, Estimated 300K+ miles bad motor. Awaiting 3500 swap.
89 Dode D350 Cummins Turbo Diesel, 370,000 miles.
92 Cavalier Z24, Estimated 300K+ miles bad motor. Awaiting 3500 swap.
89 Dode D350 Cummins Turbo Diesel, 370,000 miles.
-
Asylum
- Registered User
- Posts: 3050
- Joined: Wed Mar 31, 2004 9:36 am
- Location: Hamilton, Ontario, Canada
- Contact:
Re: cruise control does not work
Do your HVAC controls work?
Eric
Asylum Motorsports
"Where we're not happy 'til YOU'RE not happy!
'91 California Quad (Gone with just a bit of "Seller's Remorse".)
'92 3500 GT gone and not really missed. It was fun. Documented 13.47 N/A.
Asylum Motorsports
"Where we're not happy 'til YOU'RE not happy!
'91 California Quad (Gone with just a bit of "Seller's Remorse".)
'92 3500 GT gone and not really missed. It was fun. Documented 13.47 N/A.
-
Money pit Beretta
- Registered User
- Posts: 6411
- Joined: Thu Jul 26, 2007 11:36 am
- Location: Kansas
Re: cruise control does not work
Strange, last I checked they were electric and no longer vacuum controled.
keep'em flying!
-
3X00-Modified
- Administrator
- Posts: 10916
- Joined: Thu Jul 05, 2007 9:18 am
- Location: Brooklyn CT
Re: cruise control does not work
Guys...
And 95+ is electronic not 94 and older.michi wrote:I already checked all vaccum lines and theyre all good.
-
Money pit Beretta
- Registered User
- Posts: 6411
- Joined: Thu Jul 26, 2007 11:36 am
- Location: Kansas
Re: cruise control does not work
like i already said in my first post, i checked all vaccum lines, lol. And yes Eric HVAC controls works just fine. Whats about the connector thats on the cruise servo, should there always be power? i checked this ones and there isnt any power.
Re: cruise control does not work
my cruise quit working too,actually only thing that doesn't work on my car. a 95 Z26 but my car was made in 94.i have the electronic version,no vaccuum system on mine.
I also changed out the turn signal lever/switch did not help at all. maybe i replaced with a bad switch from yard.or the cruise/brake switch is not adjusted correctly or shot.or module itself.has me stumped also.
also my ABS light is on because of rear brakelines need to be replaced,only have front brakes until i can find someone to bubble flair my replacement lines without breaking the bank.can a ABS light on,cause a cruise control not to function correctly?
I also changed out the turn signal lever/switch did not help at all. maybe i replaced with a bad switch from yard.or the cruise/brake switch is not adjusted correctly or shot.or module itself.has me stumped also.
also my ABS light is on because of rear brakelines need to be replaced,only have front brakes until i can find someone to bubble flair my replacement lines without breaking the bank.can a ABS light on,cause a cruise control not to function correctly?