Stage 2 Jet chip for 2.8 - NY, 12189

List a Beretta Item for sale
Post Reply
User avatar
StevenJMcTowlie
Registered User
Posts: 66
Joined: Tue Feb 05, 2013 5:57 pm
Location: Albany, NY

Stage 2 Jet chip for 2.8 - NY, 12189

Post by StevenJMcTowlie »

Like the title says, I have a Stage 2 Jet chip for a 2.8 engine. The part # is 18909-2 . These are selling on Amazon and similar sites for around $150. I will let this one go shipped anywhere in the US for $75. Outside of the US pm for shipping details.

These Stage 2 performance chips/modules from JET will improve the performance of your car with very little work. These chips have been programmed to deliver peak power increases under hard throttle conditions, such as towing and wide-open throttle. They offer a full range of DST programming of the air/fuel ratio, ignition advance, and transmission, and are fully track and dyno-tested to ensure the most possible power without affecting day-to-day drivability.

Image
User avatar
StevenJMcTowlie
Registered User
Posts: 66
Joined: Tue Feb 05, 2013 5:57 pm
Location: Albany, NY

Re: Stage 2 Jet chip for 2.8 - NY, 12189

Post by StevenJMcTowlie »

Make an offer, this thing belongs in the hands of someone who will use it
Beretta1234567
Registered User
Posts: 389
Joined: Sun Apr 15, 2012 11:40 am

Re: Stage 2 Jet chip for 2.8 - NY, 12189

Post by Beretta1234567 »

I have never seen a photo of these things plugged into the ECM.

Is this a mod for the EPROM chip, or does it plug into the ECM in place of the EPROM chip?
User avatar
woody90gtz
Registered User
Posts: 4740
Joined: Thu Jul 11, 2002 8:45 pm
Location: Walton, NY
Contact:

Re: Stage 2 Jet chip for 2.8 - NY, 12189

Post by woody90gtz »

Looks to me like it plugs in to the ECM and the stock PROM is plugged into it.
91 "SS" - WOT 3400/5spd - 13.29@101.6 - World's fastest N/A FWD Beretta
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
User avatar
Money pit Beretta
Registered User
Posts: 6411
Joined: Thu Jul 26, 2007 11:36 am
Location: Kansas

Re: Stage 2 Jet chip for 2.8 - NY, 12189

Post by Money pit Beretta »

Dang forgot. Woody is right! I put one in my old 90GT about eight years ago. I just remember that it didn't take much time.
keep'em flying!
User avatar
StevenJMcTowlie
Registered User
Posts: 66
Joined: Tue Feb 05, 2013 5:57 pm
Location: Albany, NY

Re: Stage 2 Jet chip for 2.8 - NY, 12189

Post by StevenJMcTowlie »

Plug and play. Woody is right, plugs into the ECU then the stock PROM plugs into it. Only take about 20 min to install.
User avatar
StevenJMcTowlie
Registered User
Posts: 66
Joined: Tue Feb 05, 2013 5:57 pm
Location: Albany, NY

Re: Stage 2 Jet chip for 2.8 - NY, 12189

Post by StevenJMcTowlie »

back to the top
User avatar
StevenJMcTowlie
Registered User
Posts: 66
Joined: Tue Feb 05, 2013 5:57 pm
Location: Albany, NY

Re: Stage 2 Jet chip for 2.8 - NY, 12189

Post by StevenJMcTowlie »

Someone make me an offer, just want to get this thing off my dresser, lol
Post Reply