Quad 4 Exhaust shield

Travelor · Post by **Travelor** » Sun Jun 05, 2011 6:11 pm

Anyone have a part number for this on Rock Auto? I see nothing listed.

I grow tired of the vibrating orchestra that is my cover.

uncle · Post by **uncle** » Sun Jun 05, 2011 7:39 pm

Not available any where.

mickaz · Post by **mickaz** » Mon Jun 06, 2011 7:09 pm

use manifold wrap instead.

90GTZHO · Post by **90GTZHO** » Thu Jun 09, 2011 11:01 pm

Hell, i havent had mine installed since i bought the car. I never see any issues with it either. Of course, i do have those hood heat extractors installed too lol

SuzukiGhostRider · Post by **SuzukiGhostRider** » Fri Jun 10, 2011 12:45 am

I had left mine off when I just finished my top end rebuild. Mostly because I'm a lazy bastard sometimes and didn't want to make the umpteenth trip to the parts store (of course, I COULD have had them delivered, had I KNOWN the size and twist) for MORE parts for the bitch.

But after a few days, I could tell the heat difference without the heat shield, so I re-installed it. It's a good thing to have installed. IMO.

Travelor · Post by **Travelor** » Fri Jun 10, 2011 1:25 am

Well without it installed you will start baking your power steering rack, and stuff back there will melt. Its there for a reason. I thought about wraps, but there isn't much to wrap back there. Its not a V8.

Looks like I'll have to search the yard, and maybe see if a metal shop can't fab me up a new one.

Chad91GTZ · Post by **Chad91GTZ** » Fri Jun 10, 2011 1:30 am

Some of the twin cams came with a kevlar type relective fabric that wrapped around the rack, I run both. Rack stays nice and cool.

90GTZHO · Post by **90GTZHO** » Mon Jul 04, 2011 4:47 pm

Pat, something else you can look at is the bolts holding it down. Are they getting worn and loose as well? If so you can just pull the manifold, re-tap the holes with new bolts and put it back on. Should solve your problem

If thats not gonna work, send me a PM, theres about 3 in the yards here where i am.

woody90gtz · Post by **woody90gtz** » Tue Jun 11, 2013 7:43 pm

Nobody has pics? haha

Alpinestar10 · Post by **Alpinestar10** » Sat Jul 06, 2013 5:25 pm

Dunno if you ever got pics eric but i got shawn one and can post pics if you want. Its basically fabric that wraps around the center of the rack no need for any bolts or anything

Godlike · Post by **Godlike** » Mon Sep 16, 2013 10:30 pm

Ive been running w/o a heat sheild for some time now. Vibrations broke holes out of the sheild around the bolts of my origional one.
My GTZ Z26 and the twincam all have ps heat wraps on them scavanged off of Grandams and the yard though which seem to be enough.

woody90gtz · Post by **woody90gtz** » Mon Sep 16, 2013 10:57 pm

Yeah Brad, Cack hooked me up with one. And for the sake of pics in this thread...here it is:

Godlike · Post by **Godlike** » Mon Sep 23, 2013 6:28 pm

Ya they work well and they look proper.
I have also scavanged small sleeves off other cars to sheild the shift cables and what not

Post by **Cliff8928** » Sun Sep 29, 2013 1:06 am

If i remember right, DEI makes a perfect size heat wrap for the shift cables.. I have the other half of the of the piece from the TwinCam on my GT.

woody90gtz · Post by **woody90gtz** » Sun Sep 29, 2013 5:25 pm

I put the DEI wrap on my shift cables...was able to fit both cables in one sleeve.

Beretta.net

Quad 4 Exhaust shield

Quad 4 Exhaust shield

Re: Quad 4 Exhaust shield

Re: Quad 4 Exhaust shield

Re: Quad 4 Exhaust shield

Re: Quad 4 Exhaust shield

Re: Quad 4 Exhaust shield

Re: Quad 4 Exhaust shield

Re: Quad 4 Exhaust shield

Re: Quad 4 Exhaust shield

Re: Quad 4 Exhaust shield

Re: Quad 4 Exhaust shield

Re: Quad 4 Exhaust shield

Re: Quad 4 Exhaust shield

Re: Quad 4 Exhaust shield

Re: Quad 4 Exhaust shield

Connect with your social network account