Locating Parts

[heavywoody]

For the dash, you only have a couple options - go with the cap or have it professionally recovered.

Rockauto.com has the endlinks. There are a few brands (Mevotech, Raybestos and AC Delco).

Mevotech #'s are MS50805 and MS50806 (it lists the 805 as a non-heavyduty but it's the same part as the 806; there weren't different HD versions of it in 90).
Raybestos # is 5451090.
AC Delco # is 45G0090.

[Money pit Beretta]

Would those be better then Moog?

[heavywoody]

I like Moog for this application because they have a tendency to beef things up (they did when I replaced the same style endlink on my GTP; the bar between the links was a larger diameter then factory).

[Money pit Beretta]

Is that a Pontiac thing? After having both the Berettas that I have owned and the GF's Cavy lose their end links do to rust I checked my dads 93 GA. Those end links are huge and are still on the car after 270k. I bought my 95 with a little less than 150k with only one end link. The GF's car had 85k when it lost one and the other was almost gone(snapped when I tried to take the nut off). The end links are the same for the Beretta and Cavy. They were the smaller bolt size. Sure would like to have the bigger ones!
To the OP: You can find Moogs anywhere and at a good price.

[3X00-Modified]

Your comparing two completely different types of endlinks...

[Money pit Beretta]

They sure are, I have alot of envy when it comes to those.