Beretta Z28

90GTZHO · Post by **90GTZHO** » Sun Aug 30, 2015 7:17 pm

I cant remember dude, but are you still planning a back seat or just a 2-seater?

Sent from my VS840 4G using Tapatalk

jjanke · Post by **jjanke** » Sun Aug 30, 2015 7:26 pm

No back seat .....gonna be a rear firewall and roll cage .....for what I wanna run u need main hoop, wirh harness bars, two bars that go from main hoop to rear strut/frame and at least one diagonal between those......not really to much room left for seats.....just gonna block it all off.

jjanke · Post by **jjanke** » Sun Aug 30, 2015 11:02 pm

Pass side seat bracket done and fresh coat of paint ...found manual (non power) drivers side bracket....just waiting for it to arrive and do the same mod and seat brackets are done

bonecrrusher · Post by **bonecrrusher** » Mon Aug 31, 2015 8:29 am

Those look like Cavalier seat brackets!

Those are very similiar to the set of seat brackets that I used for my GTZ seat swap into my 94 Cavalier back in the day!

jjanke · Post by **jjanke** » Mon Sep 07, 2015 11:27 pm

both front seat brackets finished and seats and doors have been test fitted. Everything seems to be lining up nice

themixer · Post by **themixer** » Tue Sep 08, 2015 7:46 am

MORE BURNOUTS!

bonecrrusher · Post by **bonecrrusher** » Tue Sep 08, 2015 12:19 pm

Keep up the good work!

90GTZHO · Post by **90GTZHO** » Wed Sep 09, 2015 12:10 am

Lookin awesome man! Any pics of the doors on during test fit?

Sent from my VS840 4G using Tapatalk

jjanke · Post by **jjanke** » Wed Sep 09, 2015 12:17 am

Hahaha I couldn't roll the car out to get a pic cause I took the rear axle out again.......the good news is the rear end is being rebuilt with a new carrier with a 373s and all fresh seals .....I knew I should have snapped a quick pic with the doors on

damit

jjanke · Post by **jjanke** » Wed Sep 09, 2015 12:20 am

I really just waned to make sure the doors didnt hit the seat bolsters when shut......and to make sure there was enough room for the door bars (roll cage) between the seats and door inner with out cut to g the inner door shell out.. ......but there was plenty of room......

jjanke · Post by **jjanke** » Wed Sep 09, 2015 6:59 pm

Didnt really get any real work done today......took the seats back out .....I actually made a to do list ......its got a "few" things on it .......didnt look too scary though......

jjanke · Post by **jjanke** » Wed Sep 09, 2015 7:04 pm

Not sure if I ever posted these .......but I had a custom made Z28 door decals and rear facia decal made to match location and size of what would have been a Z26 decals

90GTZHO · Post by **90GTZHO** » Thu Sep 10, 2015 12:07 am

Too bad the cars gonna have a full cage. Would have been sic with no cage and appear stock even when you open the doors.

But! This work is still amazing! Still eating my popcorn buddy!

Sent from my VS840 4G using Tapatalk

bonecrrusher · Post by **bonecrrusher** » Thu Sep 10, 2015 7:11 am

Depending on how custom he wants to go - he could tie it into the A and B pillar really well and hide it.

Also - with as much as this car has been cut up and re-welded - at a minimum I would put in subframe connectors and a cage...

Jjanke - keep on going and please keep us updated!

woody90gtz · Post by **woody90gtz** » Thu Sep 10, 2015 5:57 pm

crap you're gonna beat me to being done! haha

Car is about as far from stock as you can get...I wouldn't worry too much about hiding the cage. What colors are the Zcals? I assume it's staying white too?

Beretta.net

Beretta Z28

Re: Beretta Z28

Re: Beretta Z28

Re: Beretta Z28

Re: Beretta Z28

Re: Beretta Z28

Re: Beretta Z28

Re: Beretta Z28

Re: Beretta Z28

Re: Beretta Z28

Re: Beretta Z28

Re: Beretta Z28

Re: Beretta Z28

Re: Beretta Z28

Re: Beretta Z28

Re: Beretta Z28

Connect with your social network account