Base 2.2 AT 95 Running in Brazil

[claudio.carvalho]

thanks for listening.

the plate on panel ok , the labels ok , but the riveted under carpet near the driver's door not found .

traffic delegate requires VIN Pinned somewhere in the bodywork. things in a bureaucratic country.

[1988GTU]

You'd have to remove the lower door sill trimming and the associated weather stripping. Then lift back the carpet and maneuver the harness sheathing to expose the body VIN.

[claudio.carvalho]

You'd have to remove the lower door sill trimming and the associated weather stripping. Then lift back the carpet and maneuver the harness sheathing to expose the body VIN.

i found it . but this is also a plaque on the can, and not the VIN etched directly into the can. because that's how they record the chassis number here.

I will try permission to left that way.

otherwise we should record the VIN directly on somewhere in the bodywork.

thank you so much !

[Cliff8928]

Yes, it's a riveted tag identical the one visible through the windshield. The VIN isn't stamped directly into the metal anywhere as far as I know.

[1988GTU]

Time for a little metal embossing if you must meet the local requirements..

[GTZfan]

Looks very clean, great original shape!

[claudio.carvalho]

Yes, it's a riveted tag identical the one visible through the windshield. The VIN isn't stamped directly into the metal anywhere as far as I know.

so googled really do not have

thank you friend

[claudio.carvalho]

Time for a little metal embossing if you must meet the local requirements..

if necessary we can not escape ...

thanks buddy !

[claudio.carvalho]

Looks very clean, great original shape!

yes and I will do everything to keep it that way!

hugs !