abs sensor location question
abs sensor location question
Hi guys, i have a 92 gtz quad 4 with a 5 speed. My abs light is on and i want to check the sensor before i dive to deep into this. can someone tell me where it is please? the haynes manual is no help (what a surprise)
-
rweatherford
- Registered User
- Posts: 720
- Joined: Wed Apr 25, 2001 5:39 pm
- Location: Shelbina, MO
- Contact:
abs sensor location question
Is your voltage high enough? This is usually an early sign of alternator failure.
If everything else is fine then you can check the ABS wires and sensors. Each front wheel has a sensor with a corresponding wire. The rear wire harness has a single set of wires that attach to the rear axle and then split to go to each rear wheel sensor. The rear sensors are build into the rear wheel bearings. The wires on the rear suspension are known to give some problems as are the front sensors and wires.
If everything else is fine then you can check the ABS wires and sensors. Each front wheel has a sensor with a corresponding wire. The rear wire harness has a single set of wires that attach to the rear axle and then split to go to each rear wheel sensor. The rear sensors are build into the rear wheel bearings. The wires on the rear suspension are known to give some problems as are the front sensors and wires.
Rex Weatherford
92 Beretta GTZ Quad4 Turbo / 5-speed (sold)
Best 1/4 ET =  13.523 @ 105.16 mph
07 Mazda 5 Black on Black (it's slow)
92 Beretta GTZ Quad4 Turbo / 5-speed (sold)
Best 1/4 ET =  13.523 @ 105.16 mph
07 Mazda 5 Black on Black (it's slow)
abs sensor location question
my voltage gauge reads good so im assuming its fine. no starting problems or any other electrical load type problems.
ill have to dig into the wheels tomorrow to check the sensors. thanks for the info
ill have to dig into the wheels tomorrow to check the sensors. thanks for the info