gtz turbo

clive · Post by **clive** » Mon Apr 30, 2007 7:29 pm

i just bought back my old quad 4 from a friend (1991 2.3 quad gtz) for $450 and want to rebuild it performance and add a turbo, i want it around 300 hp
i only have a rough plan of what im gonna do, if anyone has done this or has ideas for me/ what they did and what turbo they used and where to buy a performance rebuild kit would be helpfull

thanks

clive · Post by **clive** » Mon Apr 30, 2007 7:32 pm

also what kinda boost can i throw in it without destroying it too quick

KillerofRice · Post by **KillerofRice** » Mon Apr 30, 2007 10:10 pm

Probably one of your best resources for building a turbo quad would be to check out quad4forums.com. There is a lengthy write up on how to turbo a quad and a lot of people there can really help you on your way. Also Rex would be a good person to talk too, he can point you in the right direction. Good luck and I hope you succeed with the turbo.

rweatherford · Post by **rweatherford** » Wed May 02, 2007 8:36 am

300 HP is attainable. Either use a LO Quad4 block, or purchase some custom pistons. 9 PSI with a T3-60 or larger turbo can net close to that 300 HP mark.

Turbocalc says 273 HP at 6200 RPM. My dyno showed about 234 HP at the wheels at 6200 RPM and we figured that to be about 280 HP.

I would guess you would need about 12 PSI to break 300 HP on HO cams, but that would be pushing the upper limits for the stock block components IHMO.

clive · Post by **clive** » Wed May 02, 2007 11:37 pm

so far ive come up with this

ill rebuild the engine completely with a performance kit (if i can find one, anyone know where to look)
put w41 cams
put 2.5 exhaust i got no cat and a cheap magnaflow muffler on
cold air intake
bigger throttle body
put a turbo
put larger injectors and so on

if you have other ideas or if any of this is not worth while let me know
thanks

rweatherford · Post by **rweatherford** » Thu May 03, 2007 8:11 am

You might consider 3 inch exhaust. I don't think you'll be able to fit it past the rear axle though. You also need something to adjust fuel and spark.

clive · Post by **clive** » Fri May 04, 2007 5:19 pm

i think i will do 3 " exhuast , if everything goes well i will be getting the car to my house tomorow its not in the best shape and the front bumper is half missing
do u know if there are any old cars i can steal a turbo setup off of that will work good we were thinking a daytona or mustang
if u anyone who has made this work without buy all new parts give me the ideas i am trying to keep my budget low lol

thanks

Post by **Cliff8928** » Sat May 05, 2007 12:40 am

RWD Volvos are good places to find turbos! A garrett turbo from an older model will do good for most of the boost you'd need. Or you can use the newer TD05 for quick spool up time, integrated wastegate and BOV, but less PSI.

I'm sure there are other people who would know better. But as long as you get something from a car with a similar size engine you should be pretty good.

Connect with your social network account