Gauge Cluster Compatibility

Bloop · Post by **Bloop** » Fri Apr 18, 2008 10:10 am

Wanting to know what years have compatible gauge clusters with the '96, and if Corsica clusters are identical (I assume they are). My '96 has the standard cluster and I need my oil pressure info! Other than that, I'm familiar with the details of the swap. (Need new oil sending unit, etc.)

Thanks!

Post by **heavywoody** » Fri Apr 18, 2008 10:40 am

Corsica ones are the same, but I doubt you'll find a Corsica with a full gauge cluster.

You need one from a 96 Z26 due to OBDII compatibility reasons. Unless you feel like running a wire from your ICM through the engine harness, through the firewall, and into the cluster in the pin for the tach readout.

Bloop · Post by **Bloop** » Fri Apr 18, 2008 11:02 am

Excellent, thanks for the info! (I thought '95s were OBD-II also?)

SuzukiGhostRider · Post by **SuzukiGhostRider** » Fri Apr 18, 2008 4:52 pm

I believe it was actually 95 1/2 up, but it's hit or miss the way I understand it. That's probably why Woody said '96 only to save you the headache of hit and miss with '95 gauge pods. GL.

Rodville · Post by **Rodville** » Sat Apr 19, 2008 9:59 am

They went to OBD-II towards the end of the 95 year. There are very few 95's left that are OBD-II. And most were bases. If you search for 96 you will have a better chance of getting one that will work the first try out.

Bloop · Post by **Bloop** » Sat Apr 19, 2008 3:34 pm

More excellent info -- thanks much!

Connect with your social network account