blazer throttle body
- niteridingGTU
- Registered User
- Posts: 19
- Joined: Fri Oct 17, 2008 11:44 pm
- Location: Adamstown, PA
blazer throttle body
i wanna know if a 97 chevy blazer throttle body fits in a 2.8v6 motor. they blazer has the vortec v6 and i was looking at the throttle body and they diameter looks a little bigger than my stock one
- Money pit Beretta
- Registered User
- Posts: 6411
- Joined: Thu Jul 26, 2007 11:36 am
- Location: Kansas
blazer throttle body
On this I'm not sure. What I do know is that the 4.3 TB's linkage is set up for RWD. That and the hole in upper intake is not the same size. A bigger TB is not going to help if you haven't done anything else to the engine. What is your goal and how much do you want to spend? Take a look a these sites for fun http://www.domesticcrew.com/660/hybrid.html and http://www.engine-parts.com/GMV6/28camspecs.html
There are alot of cams out there for the 2.8/3.1 and reman engines for about $1500. Many people will burn chips for you after you do some mods. I was going to build a 3.1(lost the car),so I'll be happy to talk about a build with you.
There are alot of cams out there for the 2.8/3.1 and reman engines for about $1500. Many people will burn chips for you after you do some mods. I was going to build a 3.1(lost the car),so I'll be happy to talk about a build with you.
keep'em flying!
- niteridingGTU
- Registered User
- Posts: 19
- Joined: Fri Oct 17, 2008 11:44 pm
- Location: Adamstown, PA