missing vacuum line 93 3.1
missing vacuum line 93 3.1
I have a 93 beretta with a 3.1L v6, I noticed that on the throttle body that there is a oblong plug with vacuum lines going into it. there are 4 holes for what I would guess should be 4 vacuum line however I only have three vacuum lines coming out of it. The one that is missing would be the very back one(or the one closest to the firewall. What is supposed to be there and where does it go.
Re: missing vacuum line 93 3.1
IIRC, that goes to the EGR. Just behind the throttle body on the back corner of the intake.
- Ryan -
1987 Jeep Wrangler 4x4
1995 Chevy S10 Ext. Cab 4x4
1987 Jeep Wrangler 4x4
1995 Chevy S10 Ext. Cab 4x4
-
- Administrator
- Posts: 1775
- Joined: Wed Mar 03, 2004 10:03 pm
- Location: Long Grove, IL
- Contact:
Re: missing vacuum line 93 3.1
I don't think that was ever used on the 90 and newer 3.1s in the Beretta.
- Money pit Beretta
- Registered User
- Posts: 6411
- Joined: Thu Jul 26, 2007 11:36 am
- Location: Kansas
Re: missing vacuum line 93 3.1
On my 90GT there were only three. The other port was blocked off and unused.
keep'em flying!
Re: missing vacuum line 93 3.1
Your right Cliff. I forgot the newwer 3.1's and what not got an electric EGR and not Vacuum.
Check to see if it's an acctual hole and not just blocked off.
Check to see if it's an acctual hole and not just blocked off.
- Ryan -
1987 Jeep Wrangler 4x4
1995 Chevy S10 Ext. Cab 4x4
1987 Jeep Wrangler 4x4
1995 Chevy S10 Ext. Cab 4x4
Re: missing vacuum line 93 3.1
Thanks, as it turns out the hole is plugged.
-
- Registered User
- Posts: 50
- Joined: Fri May 08, 2009 11:20 pm
- Location: pittsburg,ca
Re: missing vacuum line 93 3.1
i have a 92 3.1 only had 3 lines. look at your vacuume routing guide under your hood