FS: Garage Cleanout

List a Beretta Item for sale
Roman Carter
Registered User
Posts: 22
Joined: Wed Jan 26, 2011 8:35 am

FS: Garage Cleanout

Post by Roman Carter »

**UPDATE** I have no idea what the current market value is on all this stuff. Some things may be high and some may be low. Everything is OBO. Some things I might budge others I might not. If there is nothing next to the price then chances are I'm not gonna ship it. If it has an "s" next to it, that's the price I'm asking for it shipped to the mainland. Everywhere else, ask for a price. If it has a "+sh" it means I'm gonna have to figure out shipping and it's in addition to the price.


I haven't been around for a VERY long time. I used to own an 88 & 89 GT and two 94 quad z26's. The 88 was a project car that was going to have a 3400 in it and one of my quads was going to get a W41. The 88 got parted and scrapped and the other 3 were stolen. (long story)

I've since moved on to other things but my garage still has all these parts. I keep holding out for another Beretta but the day may never come so my wife is urging me to get rid of this stuff. I'm hoping to get rid of it all at the same time.

1. 3400 with around 30k from a wrecked 02 Malibu, I bought it in 03. $300 SOLD
2. 5 speed tranny from 88 2.8 with 80k $75
3. 88 trunk lid no holes, wings, luggage bars, etc... $25
4. w41 engine with 60k $600 SOLD
5. rear solar wing for back window $100s
6. Side window vents/ vent shades whatever they're called $50s
7. Fast Forward Performance pulley for the v6 $100s
8. DIZA front bumper from group buy around 8 years ago maybe. $100
9. Window sill scrapers/ seals $25 +sh
10. NIB Fidanza lightweight flywheel for v6. $265s SOLD
11. NIB gas tank $100s
12. Tinted headlight covers that snap on over your headlights $40s
13. Pair of Tail lights $50s
14. E36 Headlights $85s
15. Whatever else I can find (upper lower intakes, coil packs, tail lights, interior trim, a few tail lights, driver & passenger in and outside window scrapers/ rubber. etc...)

$950obo picked up for everything.
Charlotte, NC

I know it's a long shot with a smaller community but I'd really like it to all go at once. I'm not interested in shipping or parting out things here and there at this time. If 2 people want to split up the v6 and quad stuff that's fine. Just come together and get it.


Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image
Last edited by Roman Carter on Tue Sep 04, 2012 2:34 pm, edited 9 times in total.
michi
Registered User
Posts: 523
Joined: Sat Mar 08, 2008 5:38 pm
Location: Austria
Contact:

Re: FS: Garage Cleanout

Post by michi »

Damn, why there arent people like you here in Europe that got such nice stuff lol!
MY91GT(Z)
Registered User
Posts: 1261
Joined: Sun Mar 12, 2006 12:11 am
Location: Rochester New York
Contact:

Re: FS: Garage Cleanout

Post by MY91GT(Z) »

solar wing n vent visors window sill scrapers how much to 14624
Last edited by MY91GT(Z) on Wed Jan 26, 2011 5:22 pm, edited 1 time in total.
User avatar
ErichZ26
Registered User
Posts: 922
Joined: Thu Apr 26, 2001 1:59 pm
Location: Chicago

Re: FS: Garage Cleanout

Post by ErichZ26 »

I am interested in the package.
Roman Carter
Registered User
Posts: 22
Joined: Wed Jan 26, 2011 8:35 am

Re: FS: Garage Cleanout

Post by Roman Carter »

michaelGTZ wrote:Damn, why there arent people like you here in Europe that got such nice stuff lol!
I've got to give it a while because I don't have time to pick pull and ship stuff. But if it's still around after a while I'd consider trading for some hard to find (in the US) euro vw parts.
MY91GT(Z) wrote:solar wing n vent visors how much to 14624
Trying not to part it out at this time.
ErichZ26 wrote:I am interested in the package.
Cool, shoot me an IM with any questions.


BTW - If people ask question about important things that I forgot to mention or include I will edit the original post with the answers to cut down on repeat questions and help the sale along.

Thanks
Roman Carter
Registered User
Posts: 22
Joined: Wed Jan 26, 2011 8:35 am

Re: FS: Garage Cleanout

Post by Roman Carter »

The quad engine doesn't have alt., not sure what other accessories it's suppose to have. It's never been taken apart from oil pan to cover.

3400 i took upper intake off to start the conversion process to the older 2.8 car. Still all there and I believe I have the lines and new intake gaskets if that's what you're planning on doing.

The front bumper is Diza not FX design, my bad.

I just found a new in box gas tank that can go with it as well.
speedy
Registered User
Posts: 1112
Joined: Mon Apr 05, 2010 9:10 pm

Re: FS: Garage Cleanout

Post by speedy »

not going to buy everything, but how much for the w41 engine? ya got my attention there, and what else do you have for a quad 4? pick up can be arranged. wouldnt be the first engine i brought home in the 2010 slowbalt, probably wont be the last either.... :crazy:
1991 beretta GTZ- 2.3l w41 cams, ported 086 head with a 3 angle valve job, fidanza flywheel with exedy racing clutch, 3.94fdr from and scx, so much more..
90GTZHO
Registered User
Posts: 1068
Joined: Sun Nov 02, 2003 11:54 am
Location: Paulden, AZ
Contact:

Re: FS: Garage Cleanout

Post by 90GTZHO »

X2 on the W41 motor, do you have any pics or anything of it? Im seriously interested. If you can ship it, let me know 86314 and i have cash :D
Geoff
95 Base V6: Current Project; Work In Progress
User avatar
woody90gtz
Registered User
Posts: 4741
Joined: Thu Jul 11, 2002 8:45 pm
Location: Walton, NY
Contact:

Re: FS: Garage Cleanout

Post by woody90gtz »

Do you have a clutch?
91 "SS" - WOT 3400/5spd - 13.29@101.6 - World's fastest N/A FWD Beretta
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
Alpinestar10
Registered User
Posts: 452
Joined: Thu Oct 28, 2010 10:27 pm
Location: GRAND RAPIDS MI

Re: FS: Garage Cleanout

Post by Alpinestar10 »

I would be interested in the flywheel and ffp pulley
Roman Carter
Registered User
Posts: 22
Joined: Wed Jan 26, 2011 8:35 am

Re: FS: Garage Cleanout

Post by Roman Carter »

Like I said I'm not really wanting to part out. I'd like someone to come get the whole works. If it comes to parting it all out I'll do my best to keep track of who wants what.

I also just found a pair of those tinted headlight covers that snap on over your headlights.
Z26_T
Registered User
Posts: 372
Joined: Mon Oct 11, 2010 12:53 pm
Location: Indiana

Re: FS: Garage Cleanout

Post by Z26_T »

When you do find someone to get the lot, please let us know who it if they want to part the stuff out. But honestly you'll make much more money if you want to part those things out yourself.

Also it would be important to add if you had the shift cables and stuff with that trans.
heavywoody wrote:Beretta, fast, reliable, and cost effective are words that should not be used in the same sentence.
95' BRM Z26. cammed/ported 3400/3500 Hybrid. HM282, OBD2, Garret T3/T04E 60 Trim, IC.
wfb2295
Registered User
Posts: 1
Joined: Tue Feb 01, 2011 6:00 pm

Re: FS: Garage Cleanout

Post by wfb2295 »

PM sent.
Roman Carter
Registered User
Posts: 22
Joined: Wed Jan 26, 2011 8:35 am

Re: FS: Garage Cleanout

Post by Roman Carter »

I found a few tail lights, driver & passenger in and outside window scrapers/ rubber. Some sort of projector headlights from a BMW (e36 I think)that I was going to put on my GT. 3.1 upper intake manifold.

I'll be updating with pics soon.
User avatar
Slinky
Registered User
Posts: 939
Joined: Wed Jul 29, 2009 9:27 pm

Re: FS: Garage Cleanout

Post by Slinky »

Im interested in the tail lights, i need an uncracked set for my z, please post up close pics of the lenses, and im also interested in the vent shades so if you could post pic of those thanx
1 Of 1 Street Legal Centri S/c Beretta's In Existance
Post Reply