strut bars

[sp33d1nc0rs1ca]

what vehicle are the strut bars for our cars off of and can i get front and rear of an oem vehicle?

[Money pit Beretta]

92 Cavalier Z24 front. Bolts right on. MRZ makes the rear, there we no OEM's. The MRZ bar also bolts right on. I have both the Cavy and the MRZ bars on my 95.
Watch out for older Z24's as the holes are offset and will not bolt up.

Check this topic:
http://www.beretta.net/forum/viewtopic.php?f=27&t=5498

Pan down to the engine pic. The bar you are looking for is the one near the firewall. In the JY it will be black, that is the OEM color.

MRZ:
http://www.mrzperformance.com/en/parts- ... tta-l-body

I have a black bar with red decals. Go to the online store to buy.

[sp33d1nc0rs1ca]

damn that was fast. ok so 92 z24 only? and ill hit up the mrz for the rear. i can most likely get the front for free.

[Money pit Beretta]

I'm not sure on the years. I know that a 90 will not work. It would be nice to have this info on the home page. Just remember to look for the ones that have the bolts inline. You could do a search here, I know that it has been said many times. If you don't use it you lose it(I forget in other words).

[Wanako]

I think it's also a 92. I got one and checked the fitment on another beretta at the yard to make sure before i bought it.

[90GTZHO]

the bars are out of the 92-94 cavaliers. Verts are guaranteed to have them, and most of the hard tops had them, mine came from a 94, but those are the only years that had the ones that fit our cars.

[sp33d1nc0rs1ca]

thanks for the input guys.

[Money pit Beretta]

You will like them alot when you get them on. And your welcome.

[sp33d1nc0rs1ca]

[Money pit Beretta]