went to the jyard, awesome stuff, pictures also!!!
went to the jyard, awesome stuff, pictures also!!!
so like the topic says, i went to the jyard today, heres what i found, some good stuff.
i'll save the best for last...
heres a red z26, interior and front bumper trashed, not much good left to it.


this is what i had to walk on, by the time i left the place i was a profesional ice walker! =)

mint grey dash, 94-96

lots of the 2.4l twin cams, complete with idi's and all. not sure if quad 4 and 2.4l twin cam idi's are interchangable.

decent blue interior with a MINT blue dash!!! again, 94-96, not sure if 93- is the same.

northstar v8 anyone? i think its like $95 a motor if ya pull it, might be worth it for some of ya.

i nearly cried when i found this...



but it was all better when i found this, i didnt grab it, but im tempted...

yeah, thats a 3800 supercharged engine, with the supercharger still there... hehehe, YET!
i'll save the best for last...
heres a red z26, interior and front bumper trashed, not much good left to it.


this is what i had to walk on, by the time i left the place i was a profesional ice walker! =)

mint grey dash, 94-96

lots of the 2.4l twin cams, complete with idi's and all. not sure if quad 4 and 2.4l twin cam idi's are interchangable.

decent blue interior with a MINT blue dash!!! again, 94-96, not sure if 93- is the same.

northstar v8 anyone? i think its like $95 a motor if ya pull it, might be worth it for some of ya.

i nearly cried when i found this...



but it was all better when i found this, i didnt grab it, but im tempted...

yeah, thats a 3800 supercharged engine, with the supercharger still there... hehehe, YET!
1991 beretta GTZ- 2.3l w41 cams, ported 086 head with a 3 angle valve job, fidanza flywheel with exedy racing clutch, 3.94fdr from and scx, so much more..
Re: went to the jyard, awesome stuff, pictures also!!!
Too bad that gtz is a 3.1.... Is the bumper decent?
I see superchargers ALL the time at pennsburg
I see superchargers ALL the time at pennsburg
- scannerman
- Registered User
- Posts: 276
- Joined: Wed Jul 02, 2003 4:45 pm
- Location: Illinois
Re: went to the jyard, awesome stuff, pictures also!!!
the idi covers are interchangeable but why would you. well i know some people have put the quad 4 covers on twin cams
I'm surprised that L67 isn't burned...
I'm surprised that L67 isn't burned...
2009 Cobalt SS LNF
1995 Z26 3100 auto <--- Totalled
1989 base 2.8 auto <-- Sold
1995 Z26 3100 auto <--- Totalled
1989 base 2.8 auto <-- Sold
Re: went to the jyard, awesome stuff, pictures also!!!
True. Almost all are its insanescannerman wrote:
I'm surprised that L67 isn't burned...
Re: went to the jyard, awesome stuff, pictures also!!!
i need that dash!
And rear Bumper/cover!
where is this jy located?
And rear Bumper/cover!
where is this jy located?
1 Of 1 Street Legal Centri S/c Beretta's In Existance
- Money pit Beretta
- Registered User
- Posts: 6411
- Joined: Thu Jul 26, 2007 11:36 am
- Location: Kansas
Re: went to the jyard, awesome stuff, pictures also!!!
I could use a nice gray dash. I will not ask you to get it in the cold. Will it still be there when it gets warm out? Very hard to find one in this area.
keep'em flying!
- 3X00-Modified
- Administrator
- Posts: 10916
- Joined: Thu Jul 05, 2007 9:18 am
- Location: Brooklyn CT
Re: went to the jyard, awesome stuff, pictures also!!!
That ice is nothing... I've been on my roof for the past two days first shoveling off the house to get rid of the 20+ inches of snow, and then I did the garage today so I could break up the ice dam at the end... Talk about learning how to walk on ice quick!
-
- Registered User
- Posts: 1261
- Joined: Sun Mar 12, 2006 12:11 am
- Location: Rochester New York
- Contact:
Re: went to the jyard, awesome stuff, pictures also!!!
did u have your figure skates on jon LOL^^^
Re: went to the jyard, awesome stuff, pictures also!!!
scannerman wrote:the idi covers are interchangeable but why would you. well i know some people have put the quad 4 covers on twin cams
I'm surprised that L67 isn't burned...
i meant the coils, i know the covers are interchangeable. lol.
1991 beretta GTZ- 2.3l w41 cams, ported 086 head with a 3 angle valve job, fidanza flywheel with exedy racing clutch, 3.94fdr from and scx, so much more..
- scd88ga
- Registered User
- Posts: 1828
- Joined: Mon Jun 28, 2010 9:02 pm
- Location: Wisconsin Rapids, Wisconsin
- Contact:
Re: went to the jyard, awesome stuff, pictures also!!!
Looks like normal salvage yard stuff to me, didn't really see anything rare or anything I would call really good stuff! It is nice to see older GM stuff in the yard though! Pick while the picking is good, if you wait too long it'll be gone!
'94 Quad 4 H.O. 5 speed Z26, Red & Rare! 1 of 896 Quad Z26's and of those it's 1 of 167 red paint/gray interior!
Need A Quality Used Part? Contact me at Posihead Auto Parts!
https://www.facebook.com/pages/Posihead ... 3779691724
Need A Quality Used Part? Contact me at Posihead Auto Parts!
https://www.facebook.com/pages/Posihead ... 3779691724
Re: went to the jyard, awesome stuff, pictures also!!!
well up my way, we don't see gtz's everyday, in fact, its only the 3rd 91+ gtz Ive seen in the junkyards in the last like 6 years, and Ive yet to see a 91+ quad Beretta. and superchargers and mint dash's aren't every day seeings either.
1991 beretta GTZ- 2.3l w41 cams, ported 086 head with a 3 angle valve job, fidanza flywheel with exedy racing clutch, 3.94fdr from and scx, so much more..
-
- Registered User
- Posts: 325
- Joined: Fri Dec 17, 2010 10:35 am
- Location: IN
- Contact:
Re: went to the jyard, awesome stuff, pictures also!!!
speedy grab me 2 of those z26 center caps and let me know what they cost plus shipping to 46323 thanks jonny
"Berettas are like a sickness...and it's incurable." quoted from woody90gtz
96 z26, 3500 swap, currently awaiting Holset HX35
,also 96 beretta, 3400 swap, rebuilt trans, 15.2 choked up with 3100 older uim & lim.
96 z26, 3500 swap, currently awaiting Holset HX35

Re: went to the jyard, awesome stuff, pictures also!!!
i need some brackets for the side moldings on a z26 not the ones on the doors but the ones that cover the rockers. shipping for the moldings would suck i can find some here but i need some good brackets... forgot to take my drill to pop the rivets on the ones i found in the fall and it woulda been crushed shortly after i was there since i stripped the whole car clean.
I could have had a good running north star engine for nothing, the neighbor at our shop was hard up for cash and sold it to my dad to scrap it, a month before that he was trying to get me to race him cuz he thought it was fast. 1 day i caught him going into town i slowed right down till he was on my bumper and punched it and i pulled away from him the whole way and i know he was hammering on it. his excuse was he had a bunch of stuff piled in the car and alot of whieght and was low on gas, i could see the front of his car lifting so i know he hammered on it and i walked away.
My friend scraped a 98 grand prix supercharged cuz the rear strut mounts were rotting out of it, it was still insured and plated. i made him take the supercharger off and we took the lower part of the intake too, it ran great but the strut mounts were shot to hell.
Theres a couple scrap yards close to me with a couple beretta's but they want too much for anything, they wanted 40 bucks for a used egr valve.
Found a really cheap wrecking yard.. but there was only 1 beretta, 95/96 z26 and i stripped the whole car, bumpers/headlights/tail lights/ trunk lid with spoiler / MINT hood not even a stone chip. all the seats, the side plastic panels and window pillars, Engine cradle and ECM. and a bunch of other small stuff, wasnt alot left of it lol. i paid 140 bucks for 2 truck loads, and sold the ecm and engine cradle to a guy for 80 bucks. Score... wish there was more berettas there i would strip every single one of them for the price they charge.
I could have had a good running north star engine for nothing, the neighbor at our shop was hard up for cash and sold it to my dad to scrap it, a month before that he was trying to get me to race him cuz he thought it was fast. 1 day i caught him going into town i slowed right down till he was on my bumper and punched it and i pulled away from him the whole way and i know he was hammering on it. his excuse was he had a bunch of stuff piled in the car and alot of whieght and was low on gas, i could see the front of his car lifting so i know he hammered on it and i walked away.
My friend scraped a 98 grand prix supercharged cuz the rear strut mounts were rotting out of it, it was still insured and plated. i made him take the supercharger off and we took the lower part of the intake too, it ran great but the strut mounts were shot to hell.
Theres a couple scrap yards close to me with a couple beretta's but they want too much for anything, they wanted 40 bucks for a used egr valve.
Found a really cheap wrecking yard.. but there was only 1 beretta, 95/96 z26 and i stripped the whole car, bumpers/headlights/tail lights/ trunk lid with spoiler / MINT hood not even a stone chip. all the seats, the side plastic panels and window pillars, Engine cradle and ECM. and a bunch of other small stuff, wasnt alot left of it lol. i paid 140 bucks for 2 truck loads, and sold the ecm and engine cradle to a guy for 80 bucks. Score... wish there was more berettas there i would strip every single one of them for the price they charge.
- scd88ga
- Registered User
- Posts: 1828
- Joined: Mon Jun 28, 2010 9:02 pm
- Location: Wisconsin Rapids, Wisconsin
- Contact:
Re: went to the jyard, awesome stuff, pictures also!!!
I have about 40-50 Beretta's to get parts from within 5-12 miles of my house! No shortage here, that's for sure! lol
'94 Quad 4 H.O. 5 speed Z26, Red & Rare! 1 of 896 Quad Z26's and of those it's 1 of 167 red paint/gray interior!
Need A Quality Used Part? Contact me at Posihead Auto Parts!
https://www.facebook.com/pages/Posihead ... 3779691724
Need A Quality Used Part? Contact me at Posihead Auto Parts!
https://www.facebook.com/pages/Posihead ... 3779691724