transmission nightmare - HELP

[#1 stunna]

login problems .... test _ before i type all that again

[#1 stunna]

hey yall .... i posted a while back about a cluch fork shaft issue . Well now i have a much bigger problem... I finally got all my parts , bout to put the retta back together when i found two small cracks in the passage ? maybe its called a boss? ( the hole that the clutch fork shaft slides through and sticks out the case)
trans shop says it cant be welded ... so now im lost ... anyone know what i can do to fix this.???

Please help ! trying to post pics but having login issues ....

Thanks

[#1 stunna]

2.jpg (45.67 KiB) Viewed 4088 times

circled in green

[#1 stunna]

4.jpg (44.16 KiB) Viewed 4088 times

what it did to the clutch fork shaft

[KFLO 93 GT]

How bad are the cracks?

Almost anything is weldable - it just depends on the skills of whoever will be doing the welding.

Or Boring it out and sleeving the boss also come to mind....

We need higher res for sure. I know the area and to me I'd think it's weldable.

[KFLO 93 GT]

Email the first shot to kurt (at) berettaspeed (dot) com

I'll upload it fullsize and repost.

[#1 stunna]

5.jpg (44.29 KiB) Viewed 4087 times

close -up .... cracks are circled in red

[KFLO 93 GT]

Do you have any higher resolution? Maybe my eyes are getting weak, but I can't see the crack(s)...

[#1 stunna]

check on my cardomain page ... i posted them there ..... on page 5 You can see em better and more close up. The sun was kinda bright . thanks again

[3X00-Modified]

thats the problem, your uploading the thumbnail they make.

[#1 stunna]

The guy at the trans shop said it would probally distort the boss and he couldnt garuantee the work so he wouldn't do it ... and i can't weld aluminum

[scannerman]

he's ataching the photos on the board so they can't be high res. he needs to use photobucket or something to upload a higher res

[Cliff8928]

I had my old one welded before with no problems. Had a metalworking shop do it.

[woody90gtz]

Just get someone who knows what they're doing. My cracked bellhousing boss came out beautiful.

[3X00-Modified]

You can do high res if you attach to the board, they just cant be 4meg..