Parting out an 88 Beretta GT 2.8

List a Beretta Item for sale
beretta_lemon
Registered User
Posts: 8
Joined: Sun May 08, 2011 10:28 pm

Parting out an 88 Beretta GT 2.8

Post by beretta_lemon »

Hey all, we are in the process of converting a 1988 Beretta GT into a 24 hours of Lemons car, which means a lot of the interior and some of the engine accessories will be coming off the car...I will list them here as we take them off, looking for reasonable offers on everything...if there is something you are looking for let me know...

First up, cruise control system from under the hood, also have harness wire cut about 8 inches from firewall...

Will be taking out the door panels, power window motors / assembly / switch, power door locks and switches very soon

Also, will be taking out both from seats and the rear seat as well as all seat belts

thanks for looking


User avatar
Amateur
Registered User
Posts: 492
Joined: Mon Nov 15, 2010 8:41 pm
Location: Aurora, IL

Re: Parting out an 88 Beretta GT 2.8

Post by Amateur »

A LeMons car, yes!

Image


....mmmmm...Airborne Ranger beretta lemons car.....
http://jalopnik.com/5624977/and-the-real-winner-is


User avatar
Thompson128
Registered User
Posts: 130
Joined: Sun Apr 24, 2011 4:53 pm
Location: Groton, CT
Contact:

Re: Parting out an 88 Beretta GT 2.8

Post by Thompson128 »

Would you happen to have a clear upper rear filler panel. No cracks.

Image


Image
beretta_lemon
Registered User
Posts: 8
Joined: Sun May 08, 2011 10:28 pm

Re: Parting out an 88 Beretta GT 2.8

Post by beretta_lemon »

Awesome car!!! Who did you cage for it?

The car is complete right now so if you give me a bit better idea of which part that is I will check its condition.

Thanks!


User avatar
Beretta_gal
Registered User
Posts: 127
Joined: Wed Apr 14, 2010 11:51 pm
Location: Whitehall,MI

Re: Parting out an 88 Beretta GT 2.8

Post by Beretta_gal »

How much for the rail including injectors???(zip code is 49452)


Beretta_gal
It's a BERETTA thing...All others just don't understand!!!
2012 Bfest Winner
heavywoody
Global Moderator
Posts: 1991
Joined: Sun Nov 03, 2002 4:10 pm
Location: Concord, NC
Contact:

Re: Parting out an 88 Beretta GT 2.8

Post by heavywoody »

Do you have the boxes that go under the speakers in the rear deck (they protrude into the trunk)?


Geoff
95 Z26 Turbo 3400 5spd - R&D Project
Beretta Preservation Society - Director of Acquisitions
Image
beretta_lemon
Registered User
Posts: 8
Joined: Sun May 08, 2011 10:28 pm

Re: Parting out an 88 Beretta GT 2.8

Post by beretta_lemon »

Sorry Beretta_Girl we are keeping the motor together...

I will check the truck tomorrow after work and see if they are there and in what condition


96base
Registered User
Posts: 31
Joined: Mon May 02, 2011 1:42 pm

Re: Parting out an 88 Beretta GT 2.8

Post by 96base »

I need front seats and rear seats? Where ya loacted at?


'87 Beretta GT - Light Blue Metallic
'96 Z26 - Cayenne Red
'96 Base - Cayenne Red: Build date: 7/96 one of the very last built.
'89 GT - In the restoring process only has 74k.
beretta
Registered User
Posts: 957
Joined: Wed Feb 02, 2011 7:33 pm

Re: Parting out an 88 Beretta GT 2.8

Post by beretta »

how much for the dash cluster ??? im in Canada but will pay all shipping cost... pm me

Edit... i take it you need it to run still, i guess you will need the cluster :( i could also use the dash harness from a V6 car as well... i just looking at my fuse panel and theres 1 fuse that is not there and cant put one in on the panel it says for MAF or something for V6 only.. have put over 20,000 KM on it as is but maybe something i should change i dont know...


beretta_lemon
Registered User
Posts: 8
Joined: Sun May 08, 2011 10:28 pm

Re: Parting out an 88 Beretta GT 2.8

Post by beretta_lemon »

96base wrote:I need front seats and rear seats? Where ya loacted at?
I am in Southern New Jersey...The seats are coming out real soon too...


beretta_lemon
Registered User
Posts: 8
Joined: Sun May 08, 2011 10:28 pm

Re: Parting out an 88 Beretta GT 2.8

Post by beretta_lemon »

beretta wrote:how much for the dash cluster ??? im in Canada but will pay all shipping cost... pm me
The gauge cluster will be coming out this weekend or early next week, I will get back to you with pictures once it is out...I have no problem shipping it to good old Canada


beretta_lemon
Registered User
Posts: 8
Joined: Sun May 08, 2011 10:28 pm

Re: Parting out an 88 Beretta GT 2.8

Post by beretta_lemon »

heavywoody wrote:Do you have the boxes that go under the speakers in the rear deck (they protrude into the trunk)?
Hey there, I have the boxes and they are in good shape, let me know if you want them and I will start taking them out...as for price make me an offer, including shipping...


mtlmikeh
Registered User
Posts: 13
Joined: Thu Apr 21, 2011 12:46 pm

Re: Parting out an 88 Beretta GT 2.8

Post by mtlmikeh »

What condition are the door panels? It would be appreciated if you could post or send me some pics.


beretta_lemon
Registered User
Posts: 8
Joined: Sun May 08, 2011 10:28 pm

Re: Parting out an 88 Beretta GT 2.8

Post by beretta_lemon »

Once it stops raining in Southern NJ I will post a bunch of pictures....


heavywoody
Global Moderator
Posts: 1991
Joined: Sun Nov 03, 2002 4:10 pm
Location: Concord, NC
Contact:

Re: Parting out an 88 Beretta GT 2.8

Post by heavywoody »

beretta_lemon wrote:
heavywoody wrote:Do you have the boxes that go under the speakers in the rear deck (they protrude into the trunk)?
Hey there, I have the boxes and they are in good shape, let me know if you want them and I will start taking them out...as for price make me an offer, including shipping...
PM sent... I need these in the next couple of weeks.


Geoff
95 Z26 Turbo 3400 5spd - R&D Project
Beretta Preservation Society - Director of Acquisitions
Image
Post Reply