heavy front end vibration when shifting into reverse

themadness · Post by **themadness** » Wed Aug 03, 2011 7:05 pm

any ideas what that could be? i know one of ya'll know......................

Post by **heavywoody** » Wed Aug 03, 2011 7:22 pm

Trans mount or engine mount. Probably trans.

themadness · Post by **themadness** » Wed Aug 03, 2011 8:26 pm

where's the transmission mount?

SuzukiGhostRider · Post by **SuzukiGhostRider** » Wed Aug 03, 2011 9:20 pm

Yup, I'd say bad transmission mount. You can't miss it. It's right on top of the transmission, driver's side. Huge. I'd bet money on it being bad.

themadness · Post by **themadness** » Wed Aug 03, 2011 9:40 pm

how urgent is it to take care of? got a/c work happening tomorrow.

Post by **heavywoody** » Wed Aug 03, 2011 10:01 pm

If you can tolerate the noise, it'll be ok for a little while. I wouldn't go forever without replacing it by any means.

Since your car is a 94, the mount is between the top of the transmission and the "frame rail". You could get a better look at it through the wheel well when you take the splash guards off.

Post by **3X00-Modified** » Wed Aug 03, 2011 10:10 pm

Guarantee the trans is touching the frame rail when in reverse causing the vibration. When the mounts go bad they sag like a bastard and the outer trans case touches the rail it gets so bad.

Beretta.net

heavy front end vibration when shifting into reverse

heavy front end vibration when shifting into reverse

Re: heavy front end vibration when shifting into reverse

Re: heavy front end vibration when shifting into reverse

Re: heavy front end vibration when shifting into reverse

Re: heavy front end vibration when shifting into reverse

Re: heavy front end vibration when shifting into reverse

Re: heavy front end vibration when shifting into reverse

Connect with your social network account