fe7 conversion?
fe7 conversion?
does anybody know where i can get a set of FE7 swaybar and endlinks?or is there a difrence between the swaybar on a gt  (30mm)?  Can i just use the fe7 endlinks?  and what brackets will i need?
fe7 conversion?
I think I still have the FE7 swaybar and bolts off my GTZ that mount internally on the crossmember in the rear of the car yet... I'd be glad to get it off my hands unless my dad threw it out...
fe7 conversion?
The FE7 front bar is a upgrade to the GT's 30mm solid bar. Some debate it, but on 3400 auto car that it made it plow more. But on my GT I did the swap and it was a noticeable improvement.
The bar itself has been discontinued. The end links I purchased new two years ago, not sure about todays availability.
The bar itself has been discontinued. The end links I purchased new two years ago, not sure about todays availability.
91' GT  SOLD
99' Saab Viggen Stg-4 315hp- in European Car Magazine  7/2006
99' Saab Viggen Stg-4 315hp- in European Car Magazine  7/2006
-
- Registered User
- Posts: 62
- Joined: Tue Mar 30, 2004 10:42 pm
- Location: Columbus Ohio
- Contact:
fe7 conversion?
I've got a perfect bar with endlinks and brackets to mount it to the side of the strut. To converte to fe7 you'd need the bar along with the springs. If you have a base.
-Nick
This car has 223,000 miles on it and gets 37 mpg highway.
RIP In it's last stages of life.
This car has 223,000 miles on it and gets 37 mpg highway.
RIP In it's last stages of life.
-
- Registered User
- Posts: 677
- Joined: Thu Apr 26, 2001 3:11 pm
- Location: Charlotte, NC
fe7 conversion?
I still have a couple sets of Polyurethane mounts for the FE7 bar available. PM me if your interested.
Ribz you find the 90* grease fittings? If not I would try your local ace hardware store.
Ribz you find the 90* grease fittings? If not I would try your local ace hardware store.
2005 Chevrolet Corvette Z51
2005 GMC Sierra 2500HD
2014 Chevy SS
2005 GMC Sierra 2500HD
2014 Chevy SS
fe7 conversion?
i have a gt, what springs are you referring to? suspension springs, or do they mount to the sway bar
fe7 conversion?
(bonecrrusher @ Oct. 18 2005,09:40)Q
U
O
T
EI still have a couple sets of Polyurethane mounts for the FE7 bar available. PM me if your interested.
Ribz you find the 90* grease fittings? If not I would try your local ace hardware store.
I dont even have them on yet, too many other projects to finish
U
O
T
EI still have a couple sets of Polyurethane mounts for the FE7 bar available. PM me if your interested.
Ribz you find the 90* grease fittings? If not I would try your local ace hardware store.
I dont even have them on yet, too many other projects to finish
91' GT  SOLD
99' Saab Viggen Stg-4 315hp- in European Car Magazine  7/2006
99' Saab Viggen Stg-4 315hp- in European Car Magazine  7/2006
-
- Registered User
- Posts: 62
- Joined: Tue Mar 30, 2004 10:42 pm
- Location: Columbus Ohio
- Contact:
fe7 conversion?
Coil springs. I think that the fe3 and fe7 springs are a little different but I'm not one hundred percent sure.
-Nick
This car has 223,000 miles on it and gets 37 mpg highway.
RIP In it's last stages of life.
This car has 223,000 miles on it and gets 37 mpg highway.
RIP In it's last stages of life.
fe7 conversion?
(backwoodzberetta @ Oct. 18 2005,12:51)Q
U
O
T
ECoil springs.  I think that the fe3 and fe7 springs are a little different but I'm not one hundred percent sure.
Fe7 springs are about .5" lower and are more of a performance spring than the Fe3.
U
O
T
ECoil springs.  I think that the fe3 and fe7 springs are a little different but I'm not one hundred percent sure.
Fe7 springs are about .5" lower and are more of a performance spring than the Fe3.
91' GT  SOLD
99' Saab Viggen Stg-4 315hp- in European Car Magazine  7/2006
99' Saab Viggen Stg-4 315hp- in European Car Magazine  7/2006
fe7 conversion?
The FE7 front springs are supposedly 10% softer than the FE3 front springs (which ride more harshly). I had some springs from a '91 GTZ and they had the same part numbers and spring codes as my '89 GT, so who knows...The FE7 front swaybar will give you a nicer ride IMO than the FE3 front swaybar because it is mounted to the struts instead of the control arms.
Edit: And yes, the endlinks are still available from GM if you don't go for bonecrrusher's polyurethane endlinks (which I think you should ).
Edit: And yes, the endlinks are still available from GM if you don't go for bonecrrusher's polyurethane endlinks (which I think you should ).
-Jeff P.
Black '88 Beretta GT
Spice Red '06 GTO
Previously Owned:
'89 GT, '91 GT, '92 GTZ (12.95@105 mph), '01 Bonneville SSEi
Black '88 Beretta GT
Spice Red '06 GTO
Previously Owned:
'89 GT, '91 GT, '92 GTZ (12.95@105 mph), '01 Bonneville SSEi
-
- Registered User
- Posts: 677
- Joined: Thu Apr 26, 2001 3:11 pm
- Location: Charlotte, NC
fe7 conversion?
Correction, I sell FE7 Poly MOUNTS for the swaybar, the endlinks themselves connect to the strut brace.
I still have sets available in Black and Red.
I still have sets available in Black and Red.
2005 Chevrolet Corvette Z51
2005 GMC Sierra 2500HD
2014 Chevy SS
2005 GMC Sierra 2500HD
2014 Chevy SS
fe7 conversion?
well whoever has whatever, let me know some prices, and shipping to 48506, also does the swaybar still mount to the same loc. as my fe3, and waht size bar is the sway bar itself, i work at autozone and get a fairly good discoun oin instock items, poly bar mounts being one of them.
fe7 conversion?
Yes, the FE7 swaybar mounts to the same part of the suspension supports as your FE3 swaybar (and that's where the mounts that bonecrrusher sells go). The endlinks, as I mentioned above, mount to the struts. 1990/91 endlinks use a removable bracket, 1992/93 endlinks use a bracket that is welded to the strut.
-Jeff P.
Black '88 Beretta GT
Spice Red '06 GTO
Previously Owned:
'89 GT, '91 GT, '92 GTZ (12.95@105 mph), '01 Bonneville SSEi
Black '88 Beretta GT
Spice Red '06 GTO
Previously Owned:
'89 GT, '91 GT, '92 GTZ (12.95@105 mph), '01 Bonneville SSEi