Rear Main seal replacment

seabass1858 · Post by **seabass1858** » Fri Jun 15, 2012 9:43 am

Is the rear main seals on the 3.1l a one or 2 piece because it would tell me if I would have to remove the transmission.

Post by **3X00-Modified** » Fri Jun 15, 2012 9:53 am

1 piece... Yes you need to remove the transmission.

You cold have answered that question buy simply looking up the part you need to replace on any auto parts website

NATIONAL Part # 4307V {#327995} Oil Seal; Fluoroelastomer Seal, Counter-Clockwise-Spiral Design, Shaft Size=2.992", Housing Bore=3.622, Outer Diameter=3.633, Width=0.374in
Rear; Viton®

seabass1858 · Post by **seabass1858** » Fri Jun 15, 2012 1:12 pm

might as well rebuild the tranny while it is out

Beretta.net