heater ac control problem

michi · Post by **michi** » Sat Oct 27, 2012 8:01 am

Hey guys, i swapped in a new dashboard some weeks ago and i just noticed that the heater doesnt work as it it should.
When i choose another position on the heater ac control where it should blow out it will not work. It always blows out at the same position even when i am chaning to defrost the windshield, it still blows out on the vents.

did i forget a vaccum hose or something? everything is connected on the heater ac control...

berettaboi · Post by **berettaboi** » Sat Oct 27, 2012 10:34 pm

i would make sure that the hoses on the back of the hvac control unit are on there solid. i can't recall how the beretta hvac systems work , havent been back there in a few years... are there rods connected (that could be disconnected)

michi · Post by **michi** » Sun Oct 28, 2012 2:23 pm

problem solved. i took out the glovebox and found out that a vacuum hose wasnt conncted. it works now

berettaboi · Post by **berettaboi** » Mon Oct 29, 2012 12:05 am

good stuff!

"You cannot make another post so soon after your last." says the forum...
oh yes i can... stop telling me what i can and can't do!

Beretta.net