Spark plugs
-
jtcoolhands
- Registered User
- Posts: 24
- Joined: Thu May 03, 2007 8:11 pm
- Location: Fort McMurray Alta.
Spark plugs
Hey all just new to the site and have a question maybe someone could help me with. Last year I bought a 1990 Beretta with the 3.1 ltr. I need to replace the spark plugs but not sure what the gap is, as the car came without the owner's manual. Also what plugs will perform the best Platinum or Titanium head
Spark plugs
Hey, welcome to the board The plugs on your 3.1L should be gapped to 0.045" and you should stick with non-platinum plugs because your ignition system may burn them up. I've heard good things about Iridium plugs (and the ones in my Bonneville are great), and lots of people use ACDelco Rapidfire #6. NGK is good. Stay away from SplitFire and Bosch +4. I don't have any info on Titanium plugs.
-Jeff P.
Black '88 Beretta GT
Spice Red '06 GTO
Previously Owned:
'89 GT, '91 GT, '92 GTZ (12.95@105 mph), '01 Bonneville SSEi
Black '88 Beretta GT
Spice Red '06 GTO
Previously Owned:
'89 GT, '91 GT, '92 GTZ (12.95@105 mph), '01 Bonneville SSEi
-
jtcoolhands
- Registered User
- Posts: 24
- Joined: Thu May 03, 2007 8:11 pm
- Location: Fort McMurray Alta.
Spark plugs
Thanks Jeff went down to Napa today and the fixed me up with what i needed I also splurged and bought some new wires hope they help out the performance a bit. Always looking for a little more hp.