wicked-irocz catback
-
Godlike
- Registered User
- Posts: 233
- Joined: Tue Apr 08, 2008 10:02 am
- Location: Sun Prairie, Wi
- Contact:
wicked-irocz catback
Just installed my catback from Dusty on the GTZ. He measured my old aluminized system the day we left for the power tour. Then took it with him and copied it. 2pc 2.5" 304 SS
Really nice fitment. I made a few cuts to tuck it closer to the car in the back. My muffler is tighter to the car than stock
I decided to use a "v"band so I had to learn to tig weld at work last week. I wasn't able to lay a bead I could live with using my mig.
My axle looks like ass. I should drop it and paint it.
Nice work Dusty! The fitment was better than stock.
Really nice fitment. I made a few cuts to tuck it closer to the car in the back. My muffler is tighter to the car than stock
I decided to use a "v"band so I had to learn to tig weld at work last week. I wasn't able to lay a bead I could live with using my mig.
My axle looks like ass. I should drop it and paint it.
Nice work Dusty! The fitment was better than stock.
90' GTZ 189whp NA 14.00@99 / 237whp 50 shot 13.3@104
95' Integra 240whp / 04' Z71 Tahoe/ 85' K20/ 15' IS350 Fsport
projects: 86 Bonneville 6.0 swap / MkIII Supra 2J swap / 91 Volvo 740
95' Integra 240whp / 04' Z71 Tahoe/ 85' K20/ 15' IS350 Fsport
projects: 86 Bonneville 6.0 swap / MkIII Supra 2J swap / 91 Volvo 740
-
woody90gtz
- Registered User
- Posts: 4740
- Joined: Thu Jul 11, 2002 8:45 pm
- Location: Walton, NY
- Contact:
Re: wicked-irocz catback
The kick out bend tucks up really nice. That part is always a struggle. I see the hooks for the rubber grommets are pretty low...maybe I will cut mine up and make them lower.
91 "SS" - WOT 3400/5spd - 13.29@101.6 - World's fastest N/A FWD Beretta
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
-
Money pit Beretta
- Registered User
- Posts: 6411
- Joined: Thu Jul 26, 2007 11:36 am
- Location: Kansas
-
bonecrrusher
- Registered User
- Posts: 677
- Joined: Thu Apr 26, 2001 3:11 pm
- Location: Charlotte, NC
Re: wicked-irocz catback
Looking good Brad!
2005 Chevrolet Corvette Z51
2005 GMC Sierra 2500HD
2014 Chevy SS
2005 GMC Sierra 2500HD
2014 Chevy SS
-
wicked-irocz
- Registered User
- Posts: 1035
- Joined: Thu Feb 20, 2003 11:21 pm
- Location: South Central MN
Re: wicked-irocz catback
Thank you for posting this Brad. I was very thankful for your help on this project and it wouldn't have happened without you. I did actually have to make significant changes to the exhaust from what you had in order to use the tooling I had available, make it in only 2 pieces, tuck it more than you previously had, and move it further away from your brake lines. Now your cat back should flow as good as your downpipe
94 Beretta Z26 57,4xx miles
3100, auto, crank windows, power locks/trunk, A/C,
To many mods to list
-intercooler
Among beretta boards
1st Turbo 4t60-e
1st Turbo 3100
1st Turbo Z26
1st 94+ Turbo
3100, auto, crank windows, power locks/trunk, A/C,
To many mods to list
-intercooler
Among beretta boards
1st Turbo 4t60-e
1st Turbo 3100
1st Turbo Z26
1st 94+ Turbo
Re: wicked-irocz catback
Looks great!
Can't wait for mine to get done Dusty!
Ready to send paypal anytime, (Tyler Thomas)
Can't wait for mine to get done Dusty!
Ready to send paypal anytime, (Tyler Thomas)
1 Of 1 Street Legal Centri S/c Beretta's In Existance
Re: wicked-irocz catback
Dusty currently has a FULL ss exhaust for sale if anyone is interested contact him.
1 Of 1 Street Legal Centri S/c Beretta's In Existance