drag racing at Bfest

Chazzman · Post by **Chazzman** » Sun Apr 29, 2007 11:30 pm

I'm wondering what I can and cannot do to the car to compete in fastest stock class V-6. I won last year by default. I want to really earn it this year.
As far as engine performance the only things done are the 2.25" exhaust and a FDP billet throttlebody. The stock airbox and paper filter are still on it. The A/C is gone and I've done the 5spd swap also.

I can swap back to a stock throttlebody if need be.

Post by **quad4berettagtz** » Mon Apr 30, 2007 8:32 pm

Chazz,

Yes, the throttlebody would push you into the Mod class. Is your exhaust from the cat back only? If it is cat back only, you would still be fine for the stock class. The swap is fine assuming you did not add LSD to it, and it is a Beretta 5 spd (which of course it is.) Thanks for asking, let me know if there is any other clarification you need.

Post by **heavywoody** » Mon Apr 30, 2007 10:02 pm

Actually, about that 5spd...

As long as McGavin doesn't show up in his SC beast, I might have a chance at modified V6... maybe... as long as nobody's using laughing gas.

Post by **Cliff8928** » Tue May 01, 2007 12:23 am

It all depends on how your one-wheel-wonder launches

rweatherford · Post by **rweatherford** » Wed May 02, 2007 8:41 am

Why would any Beretta 5-speed be a one wheel wonder? Does woody need to loose some weight? My car would almost always spin both tires unless turning. Perhaps you should add some balast on the other floorboard.

Asylum · Post by **Asylum** » Wed May 02, 2007 11:16 am

(heavywoody @ Apr. 30 2007,23:02)QUOTEActually, about that 5spd...

As long as McGavin doesn't show up in his SC beast, I might have a chance at modified V6... maybe... as long as nobody's using laughing gas.
Hmm?
I don't know Geoff?

I may have something to say about all that before the dust settles.

rweatherford · Post by **rweatherford** » Wed May 02, 2007 10:28 pm

Do you have a big fat wagon class?

Post by **heavywoody** » Sat May 05, 2007 8:28 am

(rweatherford @ May 02 2007,09:41)QUOTEWhy would any Beretta 5-speed be a one wheel wonder? Does woody need to loose some weight? My car would almost always spin both tires unless turning. Perhaps you should add some balast on the other floorboard.
I'm not gonna lie, I could stand to drop some pounds...

But by looking at my tires, and how unevenly the fronts wore, I'm going to say that having an LSD would be key for me. That or maybe I just don't know how to launch a 5spd (which is probably more the case... the only 5spd I've dragged was my Scion tC).

And Eric... you have to show up to claim the fame!

rweatherford · Post by **rweatherford** » Sun May 06, 2007 8:16 am

Geoff there's not much too it... Just try to not spin too much.

Post by **heavywoody** » Sun May 06, 2007 9:38 am

Would there be any benifit to using auto-x tires? I'm referring to the OLD BF Goodrich Comp R1's... they have never been used, and I have 2 mounted on my old Z wheels. If it would be better to get some drag radials, then I'll just do that, depending on $$$.

Even if it would be the same as my street tires, I'd probably rather use those wheels/tires because my 17's are HEAVY... just the wheel weighs 25 lbs.

I'll get some pics up of the R1's in a little bit.

Post by **heavywoody** » Sun May 06, 2007 4:51 pm

These are the tires I have 2 of: BF Goodrich Com T/A R1's, 225/60/16, Treadwear 60, Traction A, Temperature A.

If these would be better than my heavy street tires, I'll just use these.

rweatherford · Post by **rweatherford** » Sun May 06, 2007 10:50 pm

I've had a set of those. They are very stiff. They are probably about the same as a good street tire. If you save weight or height, then it will help. If you can get a set of drag radials that would be better.

R1's are better suited for corners. If you mount them up you'll find that out in a hurry.

Chazzman · Post by **Chazzman** » Mon May 07, 2007 10:27 pm

Thanks Mike, I've still got one of my stock TB's in the garage to swap back on.

Post by **heavywoody** » Wed May 09, 2007 11:08 pm

Mike, question about the "Modified V6" category...

Is a boosted/non-NA application fall under a "Boosted V6" category?

Personally, I don't think it's fair to put boosted V6's in the same class as NA motors (even if it isn't a stock NA).

Prime example: My car (3400 5spd) versus McGavins car (3400 SC 5spd). Two totally different animals. A better comparison would be my car vs Asylum's 92 GT (3500 auto).

It's like comparing apples to oranges!

rweatherford · Post by **rweatherford** » Thu May 10, 2007 8:42 am

Just add nitrous....

Connect with your social network account