Excellent condition clear fillers and Quad HO stuff.

[SuzukiGhostRider]

I have a very nice set of clear fillers off of my Quasar GTZ. I have gotten, installed and am satisifed with my tinted fillers. I know a few of you have expressed interest in the fillers IF I was to sell. So, 1988 GTU and Ron (in that order as that's how they contacted me) are up first. I will give them one day to respond. After that it's a free for all.

I also am considering selling a set of my 2.3L Quad 4 HO cams and one of my 2.3L Quad HO 086 casting number heads. If any interest in THOSE items contact me and I will post pics or send them to you. I just didn't want to dig them out for no reason unless there's interest.

I'm willing to listen to reason, but make me a serious offer on the clear fillers.

The fillers are in EXCELLENT SHAPE with one minor exception. The "nipples" on the lower panel back side ,lower along the bottom of the filler that are guides or what have you with the cheap sheet metal nuts that "cut their way on" are broken with the exception of one. I broke one tonight as the nut came off (the other came off without incident) and the other two were previously broken. The short guides are intact on the lower part of the lower filler and the bolts that that wing nuts thread onto to hold the filler in place are also perfectly fine. This filler sat snugly in my car with ZERO looseness or rattle as it. The fillers and bolts to hold them on are in EXCELLENT shape as noted. NO CRACKS, CHIPS , or missing pieces. Some typical VERY light scratches that I'm quite sure will buff right out.

See pics for condition and shape of parts.

The head is in excellent shape to my knowledge WITH NO visible cracks or warpage. It has NOT been machine shop tested. I will warranty the head to be free of cracks or warp PRIOR to install and you MUST provide proof of testing. IE: A machine shop receipt or bill dated and filled out.

The HO cams are low mileage (around 30k as I recall) and in EXCELLENT shape. No flat lobes, good journals.

Fillers as a set: $45.00 plus shipping.

Upper filler separate: $25.00 plus shipping.

Lower filler separate: $30.00 plus shipping.

086 Cylinder head: $150.00 plus shipping.

HO Cams: $250.00 plus shipping.

[SuzukiGhostRider]

Wow, no one? I was getting PM's left and right and now no one wants them. Heh.

[Wanako]

Same with me. Lol.

[ronaconda]

ok...been a bit since i've been on here...but better late than never right???

whats the shipping to 89002???

[SuzukiGhostRider]

For the set I presume Ron?

Shipping for you via UPS is about $15 a package (2 packages for the fillers) Ron. I could maybe get it done cheaper via USPS. I might be able to get it done for $20 or $25 thru them for both. I would say bank on about $65 shipped via USPS and $75 shipped via UPS. Your choice.

[96B-Mike]

dam im highly interested..33703?

[SuzukiGhostRider]

On my way to Colorado Springs right now 96B. Will get u a shipping quote when I gethome tomorrow night.

[96B-Mike]

kk thanks

[ronaconda]

96B...they are yours if you want them. I realized i have a perfect upper and a great lower in storage. So i'm good.

Thanks anyway Mike!!!

[96B-Mike]

yay! lol..and thats good new for you haha

[SuzukiGhostRider]

Ok, just got back from Colorado a bit ago. Shipping will be about $31.00 via UPS for you Mike. That's for both upper and lower together. So for the set total would be $75.00 shipped.

[96B-Mike]

dammmm idk if i can do that lol..you happen to have any fogs that you can include haha

but just give me a little time if you dont mind

[SuzukiGhostRider]

Sure, np. Sorry, no fogs.

[SuzukiGhostRider]

No one then?