1990 center consol, how do I get it out?

If there isn't a place for your question then put it here.
Post Reply
indyyellow
Registered User
Posts: 616
Joined: Fri Apr 22, 2011 5:34 pm
Location: Cincy, Ohio

1990 center consol, how do I get it out?

Post by indyyellow »

Any tricks. I have most all the interior out but that.
Tim

---2005 Magnum RT -- 116k
---1996 Ford Probe GT (V6/5sp) -- 150k (90k on motor)
---1993 Chevy Silverado Z71 -- 261k
User avatar
uncle
Registered User
Posts: 122
Joined: Tue Jul 24, 2007 8:27 am
Location: Derby City

Re: 1990 center consol, how do I get it out?

Post by uncle »

The rear bolts are under the piece of carpet at the bottom of the compartment - Other than that it is straight forward.
Image
1990 GTZ Quad 4 HO
indyyellow
Registered User
Posts: 616
Joined: Fri Apr 22, 2011 5:34 pm
Location: Cincy, Ohio

Re: 1990 center consol, how do I get it out?

Post by indyyellow »

OK they are out, it is not just LIFTING out. Are there brackets or anything holding it down elsewhere? Do I bee to take off the shift handle?
Tim

---2005 Magnum RT -- 116k
---1996 Ford Probe GT (V6/5sp) -- 150k (90k on motor)
---1993 Chevy Silverado Z71 -- 261k
User avatar
Chad91GTZ
Registered User
Posts: 1354
Joined: Thu Dec 23, 2004 8:32 pm
Location: Lomira, WI

Re: 1990 center consol, how do I get it out?

Post by Chad91GTZ »

Yeah the area under the shifter panel has more bolts, pics of where you are at in its de-assembly we could help be more specific.
Image
My Motortopia

Bfest Committee 2012, 2013, 2014
Bfest AND Bust 2012 Winner: First ever clutch swap at Berettafest!
Bfest 2013 Watermelon Award: Boob shaped hood dents FTW
User avatar
DTMAce
Registered User
Posts: 3510
Joined: Thu Sep 25, 2008 7:03 pm
Location: Michigan EUP
Contact:

Re: 1990 center consol, how do I get it out?

Post by DTMAce »

Sounds like its the same way as mine. Two bolts in the rear storage well and two bolts in the front under the shifter plate. You have to remove the shifter handle and the just pop the plate up and out. Have to disconnect the wiring for any lights, cig, etc too.
94' Z26 Project - 95' Base Project - Custom LED Light Conversions!
Chosen Proposal Submission & Committee Member for Beretta Fest 2012 in Traverse City Michigan

Image
Image
User avatar
Rodville
Registered User
Posts: 473
Joined: Tue Mar 09, 2004 8:06 am
Location: Davie, FL 33325
Contact:

Re: 1990 center consol, how do I get it out?

Post by Rodville »

There should be 6 bolts. Two at the very front, two at the middle under the shift plate, and two at the back in the compartment under the carpet (if any).
indyyellow
Registered User
Posts: 616
Joined: Fri Apr 22, 2011 5:34 pm
Location: Cincy, Ohio

Re: 1990 center consol, how do I get it out?

Post by indyyellow »

thanks folks.
Tim

---2005 Magnum RT -- 116k
---1996 Ford Probe GT (V6/5sp) -- 150k (90k on motor)
---1993 Chevy Silverado Z71 -- 261k
ronaconda
Registered User
Posts: 688
Joined: Sun Mar 23, 2008 7:30 pm
Location: Salt Lake City, UT

Re: 1990 center consol, how do I get it out?

Post by ronaconda »

You don't need to remove the entire shifter handle, but you'll need to remove the shifter knob. If it is an auto, there is a 'staple' that can be removed from the front of the knob and it will slide up and off. Mnauals have a set screw in the fron - loosen and pull up and off. To be more specific, you need to remove the ash tray; there are two screws there. Remove the ash tray assembly and there are two more under the cover. The shifter plate will come off at this point. And there are two in the storage compartment at the rear of the console.
User avatar
DTMAce
Registered User
Posts: 3510
Joined: Thu Sep 25, 2008 7:03 pm
Location: Michigan EUP
Contact:

Re: 1990 center consol, how do I get it out?

Post by DTMAce »

Yeah, forgot about those two bolts. LOL
94' Z26 Project - 95' Base Project - Custom LED Light Conversions!
Chosen Proposal Submission & Committee Member for Beretta Fest 2012 in Traverse City Michigan

Image
Image
Post Reply