94 z26 part out and more - Ontario, Canada

List a Beretta Item for sale
Post Reply
beretta
Registered User
Posts: 957
Joined: Wed Feb 02, 2011 7:33 pm

94 z26 part out and more - Ontario, Canada

Post by beretta »

I am in Ontario Canada.. i have several parts im looking to sell, just stripped a 94 Z and also have other parts. need to clean up and make room for more parts haha..
Paypal preferred for payment. Shipping will be extra. i would rather get a quote for shipping i will only charge exact shipping price.
All prices are best offer as well, i dont expect to make a fortune and i know shipping cost really suck from my location..

I will be adding more as i dig out more things and decide to part with some. this is just a few things to start off.

#1. factory 94 cd deck, powers on has sound on radio, "WILL NOT take in cd's" i dont know maybe it just needs cleaning or a simple repair, i tryed 10 times to get a cd to go in it doesnt pull it in.
Asking $25.00

#2. ebrake cables, New but have been on the car will need new joiner and clips where they push through the holders as i pealed them off, cables are excellent shape and oil sprayed. from handle to rear, and each wheel. 3 pieces. $25

#3. Rear brake backing plates, some rust easily cleaned up and painted. $15 each

#4. tail light wire harness $15

#5. tail lights, lots of small spider cracks but no pieces chipped or missing $15 each

#6. grey cup holder, slides well.. where the pin goes through on the bottom slider its cracked i didnt even notice till i was looking really close at it. still works fine. $15

#7. heater controls and knobs. $15

#8. trunk carpet $25

#9. cargo net with brackets.. no fasteners.. $15

#10. dash cluster in KM/h showing 164,XXX KM working condition. $50

#11. 3rd brake lights x2 lenses are ok but backing plates are busted good for LED conversion $10 each.

#12. Mirrors (purple... Black metalic whatever you call it lol) $15 each or $25 for the pair glass is good.

#13 94 ECM $40

#14. 94 dash harness and all relays ect.. had remote start so some wires were spliced nothing is cut.. $20

$15. steering column parts... have complete column will part out turn signal/cruise switch, air bag, ignition switch and actuator with keys. steering wheel has some chunks missing not great shape. make offer on parts.

#16 door handle trim covers.. $5 pair

#17. solid front grills, little dirty some scratches.. mostly just dirty and the camera amplifies everything... #15 each.

#18 Grey kick panels.. little dirty. will try to clean before shipping factory speakers in them $15 for pair.

#19. Auto shift plate few marks couple small burn marks around the lighter, trunk button works. $10

#20 obd1 2.8/3.1 auto ecms with proms. should work fine but no guarantee $15 each.

#21. quad engine cover and ignition module unsure if it works, cover needs paint. $20
........................................................................................

#1
Image
Image

#2
Image

#3
backing plate lower left... ebrake cables in this picture too.
Image

#4 Tail light harness in box in next picture.

#5
Image

#6
Image

#7
Image

#8
Image

#9
Image

#10
Image

#11 there is 3 in the picture im keeping one for a spare, 2 are forsale.
Image

#12 Mirrors, pictures coming soon

#13 ECM pictures coming soon

#14 Dash harness pictures coming soon

#15 Steering column pictures coming soon.

#16
Image

#17
Image

#18
Image

#19
Image

#20.
Image

#21.
Image

Will be digging out more things in the next week and updating this every day so check back for other parts, and dont be afraid to make an offer, remember all parts are plus shipping.
Thanks for viewing.
User avatar
DTMAce
Registered User
Posts: 3510
Joined: Thu Sep 25, 2008 7:03 pm
Location: Michigan EUP
Contact:

Re: 94 z26 part out and more.

Post by DTMAce »

I will take the two rear spoiler lights please. Shipping to US 49725. Let me know if that affects the price any.
94' Z26 Project - 95' Base Project - Custom LED Light Conversions!
Chosen Proposal Submission & Committee Member for Beretta Fest 2012 in Traverse City Michigan

Image
Image
User avatar
3X00-Modified
Administrator
Posts: 10916
Joined: Thu Jul 05, 2007 9:18 am
Location: Brooklyn CT

Re: 94 z26 part out and more.

Post by 3X00-Modified »

I might be interested in those kick pannels, I have to double check mine and see if they are torn or not.

I'll get back to you tomorrow or tonight on that.
Mr.Pink
Supreme Unit
Sleepy Goodness
"Beretta Guy"
heavywoody
Global Moderator
Posts: 1991
Joined: Sun Nov 03, 2002 4:10 pm
Location: Concord, NC
Contact:

Re: 94 z26 part out and more.

Post by heavywoody »

Will those e-brake cables work on a 95 (or can anyone verify)? I know there was something weird about the brake cables but I can't remember what.
Geoff
95 Z26 Turbo 3400 5spd - R&D Project
Beretta Preservation Society - Director of Acquisitions
Image
User avatar
3X00-Modified
Administrator
Posts: 10916
Joined: Thu Jul 05, 2007 9:18 am
Location: Brooklyn CT

Re: 94 z26 part out and more.

Post by 3X00-Modified »

Yes they will, 95 should be the same as 96 It was older that had a ball end vs the hook, Not sure when they changed... And Geoff you know you can get them new right? But with how they look if the price is right I understand.
Mr.Pink
Supreme Unit
Sleepy Goodness
"Beretta Guy"
User avatar
Money pit Beretta
Registered User
Posts: 6411
Joined: Thu Jul 26, 2007 11:36 am
Location: Kansas

Re: 94 z26 part out and more - Ontario, Canada

Post by Money pit Beretta »

Could the scratches on the soild grilles be buffed out or would that ruin the clear? They are the same color as my car. I'm going to need to cut them to fit the stock bumper so they don't have to be the best. Just want it to look good.
keep'em flying!
beretta
Registered User
Posts: 957
Joined: Wed Feb 02, 2011 7:33 pm

Re: 94 z26 part out and more.

Post by beretta »

heavywoody wrote:Will those e-brake cables work on a 95 (or can anyone verify)? I know there was something weird about the brake cables but I can't remember what.
i priced them out on rock auto and i think for $45 you can buy them plus shipping... depends what brand you get i think thats the cheapest ones..

This car was overhauled in 2005 with a ton of new parts and the parts i have reciepts for are not cheap parts, it had $80 front brake pads on it and Apex rear shoes.. i dont think these ebrake cables are cheapy's.

the car has less then 36,000 KM since 2005 and the ebrake cables were oil sprayed they look brand new still, only the clips that hold them into place i bent off to get them out, the adjuster piece is still all there. both my cars have good ebrake cables and i dout i would ever need them not for a few years anyways so thats why im selling these ones.
beretta
Registered User
Posts: 957
Joined: Wed Feb 02, 2011 7:33 pm

Re: 94 z26 part out and more - Ontario, Canada

Post by beretta »

Money pit Beretta wrote:Could the scratches on the soild grilles be buffed out or would that ruin the clear? They are the same color as my car. I'm going to need to cut them to fit the stock bumper so they don't have to be the best. Just want it to look good.
Im not sure how bad those scratches are. they are pretty dusty and dirty and been kicking around for a while they been moved all over my house i normally keep stuff like that on the top of the pile but they musta been shoved under something at one point.
the camera amplifies it alot too with the flash. ill give them a wash and see what they look like and re post the pictures.
beretta
Registered User
Posts: 957
Joined: Wed Feb 02, 2011 7:33 pm

Re: 94 z26 part out and more.

Post by beretta »

3X00-Modified wrote:I might be interested in those kick pannels, I have to double check mine and see if they are torn or not.

I'll get back to you tomorrow or tonight on that.
the kick panels are in great shape far as have seen.. other then some dirt on the driver side one. the car has low millage so most parts are pretty good shape. ill clean them up and re post pictures when i get time..

Ive been so busy the last 2 weeks its been nuts.. i bought that car and planned on having it stripped and scrapped within a couple days and that turned to 2 weeks. the day after i got it was nice out i was out there all day in a sweater taring stuff off, the next morning there was 8 inches of snow on it so i took some parts off little at a time and just took them off and put in boxes to store in my basement havent had a chance to really go over everything yet.
beretta
Registered User
Posts: 957
Joined: Wed Feb 02, 2011 7:33 pm

Re: 94 z26 part out and more - Ontario, Canada

Post by beretta »

Take a close look at this image... Can you find whats missing ?

Image
User avatar
Money pit Beretta
Registered User
Posts: 6411
Joined: Thu Jul 26, 2007 11:36 am
Location: Kansas

Re: 94 z26 part out and more - Ontario, Canada

Post by Money pit Beretta »

beretta wrote:
Money pit Beretta wrote:Could the scratches on the soild grilles be buffed out or would that ruin the clear? They are the same color as my car. I'm going to need to cut them to fit the stock bumper so they don't have to be the best. Just want it to look good.
Im not sure how bad those scratches are. they are pretty dusty and dirty and been kicking around for a while they been moved all over my house i normally keep stuff like that on the top of the pile but they musta been shoved under something at one point.
the camera amplifies it alot too with the flash. ill give them a wash and see what they look like and re post the pictures.
Cool man, if you want you can send them in a PM.
Nice white Z26 by the way!
keep'em flying!
beretta
Registered User
Posts: 957
Joined: Wed Feb 02, 2011 7:33 pm

Re: 94 z26 part out and more - Ontario, Canada

Post by beretta »

Money pit Beretta wrote:
beretta wrote:
Money pit Beretta wrote:Could the scratches on the soild grilles be buffed out or would that ruin the clear? They are the same color as my car. I'm going to need to cut them to fit the stock bumper so they don't have to be the best. Just want it to look good.
Im not sure how bad those scratches are. they are pretty dusty and dirty and been kicking around for a while they been moved all over my house i normally keep stuff like that on the top of the pile but they musta been shoved under something at one point.
the camera amplifies it alot too with the flash. ill give them a wash and see what they look like and re post the pictures.
Cool man, if you want you can send them in a PM.
Nice white Z26 by the way!
it could be better... stupid GM for their crappy primer.. the paint falls off the dam thing, kinda embarrassing, every time i go to the car wash i loose more and more paint lol. its very solid though and spotless underneath. its held up to my 70,000 KM ive put on it since last April when i bought it.. i defiantly do not keep it parked and do drive it hahaha. the 94 parts car was a donar for Z rims and new tires, the rest was a bonus.

the rocker panels were totally gone on the 94 and the bottom of the truck was pretty much all gone, you could lift the trunk lid without releasing the latch.

i also have new rocker panels and top plates with the car but it would cost more to ship then what they were worth
User avatar
LOLVTEC
Registered User
Posts: 241
Joined: Thu Dec 08, 2011 9:07 pm
Location: Aiken, SC

Re: 94 z26 part out and more - Ontario, Canada

Post by LOLVTEC »

Do you have a Z04 headlight wiring harness?
Image
90 Beretta GTZ
93 Beretta GT
89 Beretta GTU
95 Beretta Z26
95 Aurora
07 Colorado Xtreme
beretta
Registered User
Posts: 957
Joined: Wed Feb 02, 2011 7:33 pm

Re: 94 z26 part out and more - Ontario, Canada

Post by beretta »

LOLVTEC wrote:Do you have a Z04 headlight wiring harness?
ill have to have a look, i know i have 1 and i need it, i may have another one though.
Post Reply