No start, fire and fuel
- docrodg
- Registered User
- Posts: 137
- Joined: Mon Aug 28, 2006 10:09 pm
- Location: California and New York
No start, fire and fuel
88 gt with 2.8 L I have tried new and used injectors. Checked and they spray. Have good spark on all cylinders. Tried starting fluid and still won't start. Get back blast out of throttle (poof!). Checked the firing order (OK). Still no start. Running out of ideas, could this be a jumped chain? any other ideas???
- berettajunkie1991
- Registered User
- Posts: 217
- Joined: Sat Jul 16, 2005 1:40 am
- Location: Illinois
- Contact:
No start, fire and fuel
possibly check your ICM and crank position sensor i had the same problem (crossed wires). How many miles are on it?
No start, fire and fuel
Could be a jumped chain. Is the top end turning? If you have good spark from the coils, check them by removing the two plug wires from a coil and crank. The spark should be able to jump the towers. Check all three coils. If they check out... verify valve timing.
1990 GTZ Quad 4 HO
- docrodg
- Registered User
- Posts: 137
- Joined: Mon Aug 28, 2006 10:09 pm
- Location: California and New York
No start, fire and fuel
Figured it out, the dang thing was being rather stubborn and the crankshaft sensor was intermittent.