trying to remove a dash

[berettaboy]

having trouble removing dash from 96 z/26 is it just bolted or what?? any help on this please

[Money pit Beretta]

Yes, there are many bolts. Sorry I can't tell you where they all are. Some are on the sides and the steering column. I only got half way before I saw that the dash I wanted had a warp over the passenger side vents that I didn't like.

[Asylum]

It IS just bolted in but there are a couple of hidden/hard to get bolts up near the defroster that will piss you off trying to get at.

There is a pinned thread on this here or on BerettaStuff.

Go slow, don't get all p'od, and take your time.

You'll get it out.

Back in is a piece of cake then, just keep all the wire bundles intact.

[berettaboy]

thanks guys i will keep at it another question will the speedo from a z/26 work in a base? there are no cables on th ez/26 and have not gotten into the base car yet we are wondering if the tach and speedo will work???

[Money pit Beretta]

Sorry man I don't have any info on that. Some of the big boys will have to give you some tech help. I sure don't want to tell you that it will only to find out that it won't work.

[Barry]

91-95 base will work with 91-95 full cluster(v6, gt v6gtz z26)

Dash has 4 screws up by the windshield, 2 at the lower corners, and the bolts under the column. The rest is just unplugging and removing hvac stuff.

I did it in 100 degree weather(interior temps even hotter) and it was a terrible experience.

[Asylum]

You will have to swap out the oil pressure sender in order for the gauge to work.

It's pretty easy. Just order one from a parts store. It's located near the oil filter.

Everything else will work just fine.

[3X00-Modified]

Just remember you said you removing a dash from a 96 Z... Is this going into a base? if so what year is the base? The 96 Z cluster will have an incorrect Tach reading if you try to use it in a 95 or older vehicle, the 95 and older cars do not feed the tach from the ECM like a 96 so it will not work.

[berettaboy]

Just remember you said you removing a dash from a 96 Z... Is this going into a base? if so what year is the base? The 96 Z cluster will have an incorrect Tach reading if you try to use it in a 95 or older vehicle, the 95 and older cars do not feed the tach from the ECM like a 96 so it will not work.

both cars are 96 one is z/26 and the other is a base car with a v-6 both are automatic trans with this cluster work? since there the same year cars?

[Barry]

yes

[berettaboy]

yes

COOL THANKS!