beretta indy seat removal

[tvc3-gtz]

how in God's name do I get these seats outs of the car (front buckets and folding back seat) the car is being scrapped today but I am selling the seat set.. please anyone help me out here?

[Money pit Beretta]

There are screws on the rails of the front seats. Take them out, move the seat froward and lift up. There is a notch so that the rollers can leave the rail. Oh by the way those screws are torx. As for the rear there are two bolts on the lower seat(just behind the front seats). The upper part just pulls out. You have to lift up because they sit on tabs.

[tvc3-gtz]

so what size is the torx bit? is it a common size or does it need to be bought? and thanks for the info GREATLY appreciated

[DTMAce]

Sadly I can't remember it off hand. Like a 15 or something. Just have 2 screws to remove that are mounted at the front of each rail that block the nylon wheel at the front of the seat. As for the lower bolts, they are going to be either reverse torx or 10mm most likely. Usually you want the whole assembly to go with the seats. And if the rails are worth a crap, pull those and put them with the seats as well.

[13's or bust]

off topic sorry tvc3-gtz i replied to one of your posts about the indy wheels, do you still have them for sale?

[tvc3-gtz]

yeah I do, if youd like them I can do 225 + shipping or bro.. they are MINT, just need cleaning.. I am still trying to get these damn seats out but I don't know the correct torx size

[Money pit Beretta]

I think the rear bolts are 13mm. For the front it's T30(just checked). I bought a small Lisle set. It comes with an attachment to put a bit on a 1/4 drive extension which is very helpful for the screws near the console. Trust me, it makes the work much more easy. If your going to work on GM cars it's a must to have a good Torx set.

[tvc3-gtz]

so, the top part of the back seats in my car doesnt just come off after you lift from the tabs... the pillars where the seatbelts are mounted also hold the thing together.. I need an answer very very very soon, the car is junked as of tomorrow morning at 8am sharp.

[tvc3-gtz]

my question is, whats the size of the seatbelt mount star torx bolts (large sized too) that hold the top part of the back seat in place on the bottom underneath the sitting part of the backseat?

[Money pit Beretta]

47, no joke. It's hard to find. I had to buy another larger Lisle set just to get it.
The seat should just pull up. Pull the seat belts out of the way.

[tvc3-gtz]

I somehow managed to do it carefully with a 45
now the seats are officially out.. I'll be making a fairly complete list of whats available off of this car..

[Money pit Beretta]

Lucky, that 45 is a bit small.

[DTMAce]

Why were those interfering? I never had to remove the belts to get the seats out.. That just sounds odd.... Or do his belts mount different than the 94?

[tvc3-gtz]

wayy different!! the 90-91, then 91-92 made a huge change in a lot of their internal and external aesthetics/functions.. seatbelts being one of them